WangYe WY50QT-16A - User Manual

PREFACE
Thanks for your purchasing the motorcycle WY50QT-16A, and
sincerely welcome you to be our motorcycle user. To enjoy a more safe
and pleasurable driving, at first please familiar with the manual must
carry on before driving. Your personal safety depends not only the
vigilance and familiar operation skills, but also relates to whether you
are familiar with the mechanical performance. Before driving, check-up
and periodical maintenance are basic requirement. If maintenance and
repair needed, go to our service center for help. If you know the
mechanic knowledge and have the tools, the dealer can offer you help
with the maintenance and repair, like providing the parts catalogue and
the spare parts.
This manual explains in detail the correct operation and maintenance,
together with the expectation for your long-time use. Modifications in
specification could cause the discrepancy with some figures and content
in the manual, we feel sorry for that and hold the final right of
interpretation.
Have a good enjoyment and thanks again for your purchasing.
The important points to attention
Ÿ The driver and passenger
This motorcycle was limited to one driver and one passenger (except children younger than 12 years old).
Never exceed the Max load capacity of motorcycle.
Ÿ For the safety, avoid driving the motorcycle in atrocious weather or cold weather (under -12℃).
Ÿ For the road condition
This kinds of motorcycle can only drive on the highroad.
The caution banners about the safety or environment protection stick to the sundries box cover, the rear
carrier, and fuel tank cap. (Being visible before or during driving)
• Please carefully read the user manual
You must attention to the warning sentence or paragraph.
WARNING：
Not following the operation instruction in this manual may cause great damage to you.
ATTENTION：
Not following the operation instruction in this manual may cause injury to both you and vehicle.
Regard this manual as a permanent parts, even when transfer the vehicle to a new owner, transfer the
manual at the same time.

Summary

Preface

Important Points to Attention

Highlights critical safety, operational, and cautionary information for motorcycle use.

Motorcycle Safe Drive

Rules for Safe Driving

Provides essential rules and guidelines for safe motorcycle operation and rider behavior.

Payload and Load Capacity

Details the maximum load capacity and guidelines for carrying goods on the motorcycle.

Parts and Subassemblies

Speedometer and Indicator

Explains dashboard gauges, warning lights, and indicators.

Ignition Switch Operation

Describes the function and operation of the ignition switch and its positions.

Fuel Meter Function

Details the fuel gauge operation and its capacity indicators.

Starting Switch Usage

Explains how to use the electric starter button to start the engine.

Headlamp and Light Switches

Details the operation of headlamp, position lights, and meter light switches.

Handlebar Control Switches

Covers controls for main beam, dipped beam, turning signals, and horn.

Steering and Seat Locks

Explains how to operate the steering handle lock and seat lock mechanisms.

Operation Instruction

Pre-Ride Checks

Outlines essential checks to perform before riding for safety and accident prevention.

Brake Adjustment and Checks

Covers brake free path adjustment and checks for brake wear indicators.

Tire Inspection and Maintenance

Details regular checks for tire pressure and condition, including warnings.

Engine Starting Procedures

Guides on starting the engine using electric starter or kick starter.

Basic Driving Operation

Explains how to smoothly start moving, accelerate, and control the motorcycle.

Braking Techniques

Details proper control of throttle and brake systems for safe deceleration.

Engine Power Off and Parking

Describes how to correctly turn off the engine and park the motorcycle.

Stopping and Securing

Covers procedures for stopping the motorcycle and securing it.

Maintenance and Service

Scheduled Maintenance Plan

Provides a periodic maintenance table for regular checks and service intervals.

Troubleshooting Common Issues

Offers solutions for common engine starting, acceleration, and brake problems.

Air Filter Cleaning

Details the procedure for cleaning the air filter element and precautions.

Battery Care and Maintenance

Provides instructions on battery maintenance, storage, and cleaning corroded terminals.

Idle Speed Adjustment

Explains how to adjust the engine's idling speed for optimal performance.

Gearbox Oil Replacement

Guides on how to change the gearbox oil, including oil type and capacity.

Spark Plug Service

Covers spark plug specifications, removal, examination, and gap adjustment.

Fuse Replacement

Explains fuse specifications, replacement, and reasons for overheating.

Vehicle Storage

Long-Term Storage Procedures

Details steps for preparing and storing the motorcycle for extended periods.

Vehicle Identification

Finding VIN and Engine Numbers

Explains the location of Model No, VIN No, and Engine No for registration and service.

Tool Set

Included Motorcycle Tools

Lists the tools provided in the tool bag for basic maintenance.

Main Technical Parameters

Motorcycle Specifications Table

Provides comprehensive technical specifications including dimensions, engine, and performance.

Circuit Diagram

Electrical System Diagram

Presents the motorcycle's electrical system layout for reference.

Emission Control System Warranty

Warranty Coverage and Period

Details the warranty duration, what is covered, and the terms of coverage.

Customer Responsibilities for Warranty

Outlines customer obligations for maintaining warranty validity, including operation and maintenance.

Warranty Exclusions and Limitations

Specifies conditions and circumstances that are not covered by the warranty.

Warranty Contact Information

Provides contact details for inquiries regarding the emission control system warranty.

WangYe WY50QT-16A Specifications

General

Brand	WangYe
Model	WY50QT-16A
Category	Motorcycle
Language	English