Need help?Do you have a question about the Wansview NCM622W and is the answer not in the manual?
Guidelines for suitable environmental conditions for camera installation.
Instructions for safely moving and handling the camera.
Critical safety and handling instructions for the IP camera.
Overview of the IP Camera's features and capabilities.
Details the accessories included with the IP camera model.
Instructions for viewing video via mobile phone application.
Steps to connect and view video using a wired LAN connection.
Guide to connecting and viewing video via WiFi in a local network.
Instructions for accessing the camera feed over the internet.
How to use the PC client software for video viewing.
Alternative methods for viewing video streams.
Viewing video using web browsers other than IE.
Using common software like VLC player for video.
Adjusting video, audio, and image parameters for optimal performance.
Configuration of video stream resolution, bit rate, and frame rate.
Setting audio input volume and audio encoding types.
Adjusting brightness, saturation, contrast, and night mode settings.
Configuring network settings, IP address, and ports via web interface.
Setting up IP address, subnet mask, gateway, and DNS.
Instructions for configuring WiFi connectivity.
Configuring remote access via DDNS.
Configuring the ONVIF protocol for interoperability.
Setting up alarm functions and detection.
Configuring the external alarm input detection mode.
Setting up motion detection areas and sensitivity.
Configuring how the camera responds to detected alarms.
Scheduling specific times for alarm triggering.
Advanced configuration options for the camera.
Managing user accounts and access levels.
Configuring automatic picture capture to SD card or FTP.
Setting up scheduled recording times for the camera.
Configuring email alerts for alarm events.
Configuring FTP settings for storing captured data.
Configuring settings for multiple devices simultaneously.
System-level configurations and information.
Viewing detailed information about the camera's hardware and software.
Setting the camera's current date, time, and time zone.
Options for rebooting, restoring defaults, and backing up settings.
Accessing and viewing system event logs.
Detailed features and specifications for the NCM620W model.
Features and specifications for the NCM621W waterproof camera.
Features and specifications for the NCM622W PTZ camera.
Features and specifications for the NCM623W cube camera.
Features and specifications for the NCM624W PTZ camera.
Features and specifications for the NCM625W PTZ camera.
Features and specifications for the NCM626W outdoor camera.
Features and specifications for the NCM627 hemisphere camera.
Features and specifications for the NCM628W waterproof camera.
Features and specifications for the NCM629W cube camera.
Features and specifications for the NCM630W PTZ camera.
Features and specifications for the NCM631W PTZ camera.
General| Lens | 3.6mm |
|---|---|
| Two-Way Audio | Yes |
| Power Supply | DC 5V |
| Motion Detection | Yes |
| Compatibility | iOS, Android |
| Image Sensor | CMOS |
| Wireless Connectivity | Wi-Fi (802.11b/g/n) |
| Operating Temperature | -10°C to 50°C |
| Storage | Micro SD card up to 128GB |
| Protocols | HTTP, FTP, RTSP, ONVIF |
| Pan/Tilt | Yes |
| Resolution | 1920x1080 (Full HD) |
| IR Distance | Up to 30 meters |
To Next Page
