Ware Manufacturing Chick-N-Hutch User Manual

6 - Washers
PARTS DESCRIPTION:
Chick-N-Hutch
•
Assembly Instructions
Tools Required: Regular Screwdriver
1-800-295-2243
625 S. 27th Avenue
Suite 120
Phoenix, AZ 85009
www.waremfginc.com
Revised 02/10/09
STEP 2
1 of 2
STEP 1
Install Pan Rails
on the Left "B"
and Right "B"
sides using
8- 2" Bolts
Fasten Side Panels (B) to Front Panel (C).
Use 6- 2" Bolts and 6- Wing Nuts.
Make Sure Door Faces Outward on Left Side
and that the Hutch Slants to the Back.
All wire must face
into the cage
17 - Wing Nuts
10 - ¾
”
Bolts
8 - 1 ½
”
Bolts
14 - 2
”
Bolts
2" Bolts

Ware Manufacturing Chick-N-Hutch Specifications

General

Brand	Ware Manufacturing
Model	Chick-N-Hutch
Category	Farm Equipment
Language	English

Summary

Parts Identification

Assembly Steps

Install Pan Rails

Install pan rails on the left and right sides of the hutch using 2-inch bolts.

Fasten Side Panels to Front

Attach side panels to the front panel with bolts and wing nuts, ensuring correct door orientation.

Install Floor and Back Panel

Slide floor into the hutch and fasten the back panel to the side panels with bolts and wing nuts.

Attach Roof and Stop Chain

Set the roof on the hutch, align hinges, and attach with bolts. Install the stop chain.

Attach Final Components

Attach the pan, wind guards, chick-n-roost, and egg door using specified hardware.