Waring LB10 User Manual

Variable Speed Blender LB10
OPERATION INSTRUCTIONS
IMPORTANT SAFEGUARDS
When using electrical appliances, basic safety precautions should always be followed.
1. READ ALL INSTRUCTIONS FOR VARIABLE SPEED BLENDER.
2. To protect against electrical hazards do not immerse motor unit in water or any liquid.
3. Unplug from outlet when not in use, before putting on or taking off parts, and before cleaning.
4. Avoid contacting any moving parts.
5. Do not operate any appliance with a damaged cord or plug or after the appliance malfunctions
or is dropped or damaged in any manner. Return appliance to the Waring Service Center for
examination, repair or electrical or mechanical adjustment.
6. Do not use outdoors.
7. Do not let cord hang over the edge of table or counter, or touch hot surfaces.
8. Keep hands and utensils out of container when blending to prevent the possibility of severe
personal injury and/or damage to the blender.
9. Always operate the blender with the cover in place.
OPERATION
1. Make sure that power switch is in the off position.
2. Turn knob counterclockwise to its minimum setting.
3. BEFORE CONTINUING MAKE SURE THAT THE BLENDER CONTAINER IS SECURELY ON
THE BASE UNIT.
4. Turn power switch on the unit to the on position.
5. Rotate speed control knob clockwise increasing the blender speed to the desired point.
NOTE: If you desire to start from a set speed follow the preceding steps 1-3 and then set the
desired speed before turning the blender power switch to the ON position.
FOR MORE INFORMATION ON WARING FULL LINE OF LABORATORY BLENDERS AND
ACCESSORIES CONTACT US AT THE FOLLOWING ADDRESS.
Waring Products
P.O. Box 3201
314 Ella T. Grasso Ave.
Torrington, CT 06790 Phone: 1-800-492-7464 E-mail: www.waringproducts.com
193-019274 RV01 0006

Waring LB10 Specifications

General

Brand	Waring
Model	LB10
Category	Blender
Language	English

Summary

Important Safeguards

General Electrical Safety

Avoid electrical hazards by keeping motor units dry and unplugging appliances when not in use.

Safe Operation Practices

Do not operate damaged appliances, use outdoors, or let cords hang over edges. Keep hands and utensils away from moving parts.

Blender Cover and Operation

Always operate the blender with the cover in place and ensure the container is securely on the base unit.

Blender Operation

Starting the Blender

Ensure the power switch is off and the speed control knob is at its minimum setting before operation.

Adjusting Blender Speed

Turn the power switch on, then rotate the speed control knob clockwise to increase speed.

Service and Contact Information

Repair Service

Ship blenders for repair to the Waring Factory Service Center or an Authorized Service Center.

Biological Material Handling

Sterilize items processing biologically active materials before shipping for service.

Grounding Instructions

Grounding Type Plug

Use 120 Volt units with a properly connected grounding-type outlet or an adapter if necessary.

Adapter Grounding

Ensure adapter grounding lugs are secured under the outlet cover plate screw for proper grounding.

240 Volt Unit Grounding

240 Volt units require user-installed plugs adhering to local electrical codes and conductor color coding.