Page 8
1.7 Storage / Transport
The units come on a pallet (Dimensions of shipping sizes are shown below) and are secured to
the pallet using screws. If the units are to be stored prior to installation, they must be kept
indoors in storage conditions at a temperature of between 5°C and 60°C with a humidity level
between 10%RH and 80%RH in order to provide a non-condensing environment. The units
must not be stacked in storage or during transport. During transport the units must be kept in an
upright position and should never be allowed to tilt more than 45° during loading or unloading.
Table 4 Shipping Details
To Next Page
Loading...