Need help?Do you have a question about the WarmlyYours Ember and is the answer not in the manual?
General| Voltage | 120V or 240V |
|---|---|
| Minimum Installation Temperature | 40°F (5°C) |
| Maximum Exposure Temperature | 194°F (90°C) |
| Type | Radiant Heating System |
| Application | Floor Heating |
| Heating Area | Varies by model |
| Installation | Embedded in thin-set mortar or self-leveling compound |
| Watts per Square Foot | 12W/ft² |
| Heating Cable Type | Twin conductor |
| Maximum System Length | Varies by model |
| Warranty | 25 years |
Direct heating systems using infrared heat radiation with low energy consumption and carbon fiber heat conductor.
Radiant panels for various rooms, heating up in 5-10 minutes, with surface temperatures from 80-125°C regulated by sensors.
Discusses panel types for different room applications, including ceiling and wall mounting options for optimal radiation and space saving.
General safety guidelines for EMBER heating panels, emphasizing suitability for heating, supervision of children, and avoiding wet conditions.
Specific warnings include not covering the heater, avoiding contact due to high temperatures, and not using damaged cords or near water.
Mandates using original mounting hardware, warns against modifying panels, and details specific mounting distances and safety precautions.
Guides users on connecting the heating panel after assembly and explains the initial heating process and how to save energy.
Advises against placing items on the heater, notes normal operational noises, and highlights high temperatures and sensor functions.
States panels require no maintenance but provides cleaning steps: unplug, cool down, use a slightly dampened cloth, avoid abrasives.
Recommends contacting the dealer for irregularities, disconnecting power for malfunctions, and not altering labels or warning stickers.
To Next Page