To Next Page

To Previous Page

3.1.3. General Information on Positioning

With infrared radiation, improper positioning can result in certain areas of space in a room experiencing a “shadow” effect.

Optimal positioning can avoid shadow effects. For detailed information about the optimal positioning, please consult your

dealer where you purchased the EMBER panel.

3.2. Instructions for First Use

• Note that Section 3.1. mentioned instructions for assembly.

• Now connect the heating panel to a perfectly placed and installed pair of sockets (note the instructions mentioned above for

safety).

• Now the heating panel can be put into operation. The startup heating time is approximately 5 to 10 minutes. Your room

will not feel warmer immediately, because the cold objects in the room (furniture, walls, ceilings, oors, etc.) need to warm

up rst. Once these surfaces are heated, the warmth will spread throughout the room and you will be able to reduce the

duration of time in which the heating panel is in operation.

Instructions for Installation

Section 3

Good Positioning Bad Positioning

WarmlyYours Ember User Manual

Questions and Answers: