SAFETY RULES
22
- Do not leave the heater unattended during use. Keep the heater in place inaccessible to
children. Use the automatic sleep timer with care. Leaving the heater unattended may cause
automatical operation of the device.
- Always disconnect the power plug when moving or cleaning this device. When disconnecting
the device from the network, first turn it off with the button, then disconnect its plug. Do not
tug on the power cord.
- The product is intended for home use.
- The heater is intended for indoor use. Don't use it outdoors!
- Before switching on the heater, make sure that any of its element is not damaged. In case of
demaging the housing, heater, cord or plug, it is not allowed to plug the device into the power
supply.
- Keep a safe distance from flammable and explosive materials to avoid fires and explosions.
- Connect the device to a socket that matches the plug of the heater. Requirements for
socket and power supply: AC 230V, frequency 50 Hz.
- It is strictly forbidden to insert elements into the housing or protective grille of the heater. It
may cause electric shock.
- Do not touch the metal housing as it becomes hot during operation. Hold the heater away
from children to avoid the risk of burns. After turning off the device, wait a few minutes for the
heater to cool down before it can be placed safely into its packaging.
- It is strictly forbidden to unscrew the heater yourself. In case of damage heater, contact
WARMTEC service for assistance.
- If you are not going to use the heater for a long time, disconnect the plug from the socket.
ATTENTION!
Before installing and using the device, read the manual. Due to the ongoing work to
improve the quality of the product, there may be changes in the product designs that are
not included in this manual. However, they do not impair the performance of the product.
To Next Page
Loading...