To Next PageTo Next Page
Need help?Do you have a question about the Warn Industries xd9000i and is the answer not in the manual?
General| Gear Ratio | 156:1 |
|---|---|
| Fairlead | Roller |
| Recommended Battery | 650 CCA minimum |
| Battery Leads | 2 gauge |
| Finish | Black Powder Coat |
| Rated Line Pull | 9, 000 lbs |
| Motor | Series Wound |
| Gear Train | Planetary |
| Brake | Automatic Load Holding |
| Battery Leads Length | 6 ft (1.8 m) |
| Drum Size | 2.5" x 8.5" |
Covers warnings and cautions for moving parts, falling/crushing, chemical/fire hazards, and cut/burn hazards.
Details safe operating positions, sound emissions, cleaning, and maintenance procedures for the winch.
Provides guidance on selecting a strong mounting location and using appropriate hardware for winch installation.
Explains how to properly route and connect electrical cables, battery recommendations, and insulation.
Details remote control usage, clutch operation, spooling out, spooling in, and avoiding overload/overheating.
Outlines the procedure for pre-spooling and stretching new wire rope under load for optimal performance and life.
