Warren Controls 313 - 313 Overflow Trap Parts Kits

10
2600 Emrick Blvd • Bethlehem, PA 18020 • USA •800-922-0085 • www.warrencontrols.com
(PLEASE PROVIDE OVERFLOW TRAP SERIAL NUMBER TO GET CORRECT KIT PART NUMBERS)
Three different parts kits are available. The inspection kit allows for the overflow trap to opened so its internal parts may be
inspected. The float ball kit allows for the float ball to be replaced. The internal vba kit allows for the entire internal valve body
assembly, minus the float ball, to be replaced. The internal vba kit is preset at the factory to provide the correct water level in the
float chamber.
313 INSPECTION KIT - SEE DWG 03130611101
ITEM QTY DESCRIPTION ITEM QTY DESCRIPTION
19 1 INNER VALVE BODY GASKET 23 1 END COVER GASKET
313 FLOAT BALL KIT - SEE DWG 03130611101
ITEM QTY DESCRIPTION ITEM QTY DESCRIPTION
4 1 FLOAT BALL 23 1 END COVER GASKET
19 1 INNER VALVE BODY GASKET
313 INTERNAL VBA KIT - SEE DWG 03130611101
ITEM QTY DESCRIPTION ITEM QTY DESCRIPTION
1 2 CAPSCREW 12 1 JAMNUT
2 A / R WASHER 13 1 LEVER BRACKET BASE
3 A / R CAPSCREW 14 1 INNER VALVE BODY COVER
5 1 FLOAT LEVER 15 1 INNER VALVE BODY
6 3 CLEVIS PIN 16 1 PILOT SUBASSEMBLY
7 3 COTTER PIN 17 1 STEM GUIDE
8 1 LEVER BRACKET 18 3 CAPSCREW
9 1 FULCRUM LINK 19 1 INNER VALVE BODY GASKET
10 1 CLEVIS 20 1 PISTON
11 1 JAMNUT 23 1 END COVER GASKET
313 KIT PART NUMBERS
SIZE
IN
PRECERTIFIED DESIGN PRE CD
OR CERTIFIED DESIGN CD INSPECTION KIT FLOAT BALL KIT
INTERNAL VALVE
BODY ASSEMBLY KIT
1 Pre CD K31306XXX004 K31306XXX001 K31306XXX000
1 CD K31306XXX005 K31306XXX003 K31306XXX002
1-1/2 & 2 Pre CD & CD K31309XXX004 K31309XXX003 K31309XXX002
3 Pre CD & CD K31311XXX004 K31311XXX003 K31311XXX002
4 Pre CD & CD K31313XXX004 K31313XXX003 K31313XXX002
6 Pre CD & CD K31315XXX004 K31315XXX003 K31315XXX002
313 OVERFLOW TRAP PARTS KITS