Warren rupp SANDPIPER S30 - User Manual


Model S30
Metallic
Design Level 1
Certied Quality

A Unit of IDEX Corporation
800 N. Main St.,
Manseld, Ohio 44902 USA
Telephone 419.524.8388
Fax 419.522.7867
SANDPIPERPUMP.COM
© Copyright 2017 Warren Rupp, Inc.
All rights reserved
OPTIMIZED PERFORMANCE
Certied Quality
ISO 9001 Certied
ISO 14001 Certied
SERVICE & OPERATING MANUAL
Original Instructions
1: PUMP SPECS2: INSTAL & OP3: EXP VIEW4: AIR END5: WET END6: OPTIONAL7: WARRANTY

Summary

Pump Specifications

Explanation of Pump Nomenclature

Details the coding system used for pump model identification and specifications.

Performance Curves and Specifications

Presents performance curves, capacity, head, and pressure ratings for the S30 Metallic pump.

Material Profile and Temperature Limits

Installation and Operation

Principle of Pump Operation

Recommended Installation Guide

Provides instructions for proper pump installation, including accessories and air supply.

Troubleshooting Guide

Lists common pump symptoms, potential causes, and recommended solutions.

Wet End Components

Diaphragm Service Drawings

Diaphragm Servicing Procedures

Provides step-by-step instructions for diaphragm assembly and servicing.

Warranty and Certificates

5-Year Limited Product Warranty

Outlines the terms, conditions, and limitations of the product warranty.

ATEX EU Declaration of Conformity

Warren rupp SANDPIPER S30 Specifications

General

Model	S30
Category	Water Pump
Maximum Pressure	125 psi (8.6 bar)
Type	Air Operated Double Diaphragm Pump
Maximum Solids Handling	0.5 in (12.7 mm)
Materials of Construction	Aluminum, Polypropylene, Stainless Steel