Warwick ROCKBOARD MOD V2 User Manual

Thank you for purchasing a RockBoard® MOD V2 - the new portal to your setup! The RockBoard® MOD V2 All-in-One Patchbays oer a simple solution to organize all the
connections to and from your eects setup, whether you are using a RockBoard® or any other brand pedalboard. The MODs are designed to route connections from
underneath your pedalboard to its front, in order to give you a central access point to your setup and tidy up your connections. Please note, that the MODs do not require any power,
and they do not distribute power. They are routing tools to organize your eects rig‘s connections.
There are 3 dierent „patchbay-only“ versions of the MODs:
Manuals for
MOD V2 1+2+3
AMP FOOTSWITCH
AC IEC
thru
(male)
DC 2,1 x 5,5 mm
barrel thru
6,3 mm / ¼"
TRS thru
XLR thru
(male)
DC 2,1 x 5,5 mm
barrel thru
XLR thru
(female)
6,3 mm / ¼"
TRS thru
MOD
1
V2
AC IEC
thru
(female)
OD / DIST / MOD DELAY / REVERB
POWER SUPPLIES
POWER MAINS
FOOTSWITCH IN
IN
SEND RETURN
A
B
C
D
E
XLR
BARREL
IEC
EXAMPLE SET UP

Warwick ROCKBOARD MOD V2 Specifications

General

Brand	Warwick
Model	ROCKBOARD MOD V2
Category	Accessories For Music Instruments
Language	English

Summary

RockBoard MOD V2 Introduction and MOD 1 V2

RockBoard MOD V2 Overview

Introduces the RockBoard MOD V2 All-in-One Patchbays and their purpose.

MOD 1 V2 Description

Details the connections and features of the RockBoard MOD 1 V2 patchbay.

RockBoard MOD V2 Variants and Safety Information

MOD 2 V2 Description

Details the connections and features of the RockBoard MOD 2 V2 patchbay.

MOD 3 V2 Description

Details the connections and features of the RockBoard MOD 3 V2 patchbay.

General Safety and Operating Precautions

Important guidelines for safe use, operation, and care of the MOD V2.

Environmental Specifications

Specifies the operating conditions and environmental limits for the RockBoard MOD V2.

Mounting Your RockBoard MOD V2

Mounting on a RockBoard Pedalboard

Step-by-step guide for installing the MOD V2 in a RockBoard pedalboard's slot.

Detaching the MOD V2 Front Plate

Instructions on how to remove the front plate for alternative mounting options.

Mounting on a Non-RockBoard Pedalboard

Procedures for attaching the MOD V2 to third-party pedalboards.