Need help?Do you have a question about the Washtech GM and is the answer not in the manual?
General| Brand | Washtech |
|---|---|
| Model | GM |
| Category | Dishwasher |
| Language | English |
Instructions for qualified personnel for proper installation of the machine.
Requirements for operating staff, including restrictions for children and infirm persons.
Warning about surfaces that can become hot or very hot during operation.
Guidance on handling hazardous detergents and recommended use of protective gear.
Precautions regarding high wash and rinse water temperatures.
Safe cleaning practices, including avoiding hoses and water splashes.
Emphasizes that only qualified personnel should perform maintenance or repairs.
Procedure for safely replacing a damaged power cord.
Instructions for unpacking the machine and verifying all components are present and undamaged.
Guidance on placing the machine on a suitable, stable, and level surface.
Requirements for water supply, including flow rate, temperature, and pressure.
Details about the required electrical connection, voltage, and frequency.
Instructions for connecting the drain pump hose to the appropriate waste system.
How to connect the detergent supply and prime the pump for operation.
Connecting the rinse fluid supply and adjusting the dosage for optimal results.
Initial operation checks and ensuring the operator understands instructions.
Common issues encountered during installation and their potential solutions.
Procedure for shutting down the machine at the end of each day's operation.
Importance and methods of pre-rinsing dishes before washing for better results.
Guidelines for loading racks to ensure efficient washing and prevent overcrowding.
Information about the available cycle durations for the GM machine.
Guidance on using correct detergents and rinse aids for optimal cleaning performance.
Explanation of the drying process and factors that influence its effectiveness.
Daily cleaning tasks for the machine, including draining and filter maintenance.
Weekly cleaning procedures involving wash arms, jets, and filter removal.
Troubleshooting common display codes and their associated remedies.
Common issues related to the filling process and their potential solutions.
Troubleshooting problems where dishes are not reaching the required hot temperatures.
Issues that may prevent the wash cycle from starting correctly.
Problems encountered with the cycle finishing, such as excessive wash times.
Addressing poor wash or rinse results and identifying their causes.
Reasons why dishes may not be drying properly after the wash cycle.
Troubleshooting excessive foaming observed during the wash cycle.
To Next Page
