Need help?Do you have a question about the Wasp Delta Wasp 4070 Industrial X Series and is the answer not in the manual?
General| Build Volume | 400 x 400 x 700 mm |
|---|---|
| Filament Diameter | 1.75 mm |
| Travel Speed | up to 300 mm/s |
| Bed Temperature | up to 120°C |
| Extruder Type | Direct drive |
| Nozzle Diameter | 0.4 mm (standard) |
| Material Compatibility | PLA, ABS, PETG, TPU, Nylon |
| Connectivity | USB, Ethernet, Wi-Fi |
| Weight | 80 kg |
| Frame | Steel and aluminum |
| Power Supply | 220 V |
| Software | Simplify3D |
| Printing Technology | Fused Filament Fabrication (FFF) |
| Layer Height / Resolution | 50 - 400 microns |
| Nozzle Temperature | Up to 300°C |
To Next Page
