The Wasserstein Smart Water Leak Detector is designed to provide early warning of water leaks in your home, integrating with a smart home ecosystem for remote monitoring and alerts.
Function Description:
The device consists of a main water sensor unit and a separate probe cable. The water sensor unit is responsible for detecting the presence of water and triggering an alarm. The probe cable extends the detection range, allowing the sensor to be placed in an optimal location while the probe monitors a specific area prone to leaks. When the probe comes into contact with water, the sensor emits an audible beep and sends notifications to your smartphone via the Wasserstein App. The app allows users to monitor the device's status, view a record of past events, and adjust settings such as alarm preferences and low battery alerts.
Important Technical Specifications:
- Power: CR123A - 3V battery.
- Working Current: 80-110 mA.
- Sleep Current: 27.8 uA, indicating low power consumption during standby.
- Wireless Type: 2.4 GHz Wi-Fi. It is important to note that the device is not compatible with 5 GHz Wi-Fi networks.
- Wireless Range: Up to 147.6 feet (approximately 45 meters), providing flexibility in placement within a typical home environment.
- Size: The main sensor unit measures 2.6 x 2.6 x 0.9 inches. When placed in its holder, the dimensions are 2.7 x 2.7 x 1.3 inches.
- Supported Wi-Fi Standard: IEEE 802.11b/11bgn mixed/11bg mixed, ensuring compatibility with common Wi-Fi routers.
- App Requirements: Compatible with smartphones or tablets running iOS 9.0 or later, or Android 5.0 or later. An upload speed of at least 2 Mbps is recommended for optimal app performance.
Usage Features:
- Easy Setup: The device can be mounted using an adhesive tape or screws provided with the holder. The water sensor clicks securely into the holder, and the probe cable plugs into a dedicated port on the sensor.
- Probe Cable: The included probe cable allows for flexible placement, enabling the main sensor to be mounted in a convenient location while the probe extends to the area where water detection is needed, such as under a sink, near a water heater, or in a basement.
- Audible Alarm: Upon detecting water, the sensor emits an audible beep, providing immediate local notification of a leak.
- Smartphone Notifications: Through the Wasserstein App, users receive alerts directly on their mobile device, allowing for remote monitoring and timely action even when away from home.
- Device Record: The app maintains a record of all events, including normal status and flooding incidents, providing a history of the device's activity.
- Customizable Settings: Users can adjust various settings via the app, including the alarm set and low battery alerts, to suit their preferences and needs.
- Auto Scan Feature: For simplified pairing, the device supports an "Auto Scan" feature within the app, which requires Bluetooth to be enabled on the mobile device. This streamlines the process of adding the Smart Water Sensor to your smart home network.
- Manual Device Addition: Alternatively, devices can be added manually through the app if auto-scan is not preferred or successful.
Maintenance Features:
- Battery Replacement: The device is powered by a CR123A - 3V battery, which can be easily replaced by opening the water sensor unit.
- Resetting the Device: To reset the device, the battery needs to be removed and then reinserted. After reinserting, pressing and holding a button on the sensor until a light starts blinking initiates the reset process. This is useful for troubleshooting or re-pairing the device.
- Low Battery Alerts: The Wasserstein App provides notifications for low battery levels, ensuring that users are aware when it's time to replace the battery, preventing interruptions in leak detection.
The Wasserstein Smart Water Leak Detector is a thoughtful product designed to enhance home safety by providing reliable and timely alerts for water leaks, integrated with a user-friendly app for comprehensive control and monitoring.
Need help?
General
To Next Page