Need help?Do you have a question about the Watchguard Firebox X1000 and is the answer not in the manual?
General| Brand | Watchguard |
|---|---|
| Model | Firebox X1000 |
| Category | Gateway |
| Language | English |
Helps users choose between routed and drop-in configurations based on network needs and interface setup.
Guides users on installing and configuring the System Manager software on a designated computer.
Provides instructions for periodically changing Firebox passphrases to enhance security and prevent unauthorized access.
Guides users through initiating a new configuration file using the Policy Manager tool.
Details how to set IP addresses for Firebox interfaces based on the selected configuration mode.
Explains how to define network routes to determine which interface the Firebox uses for destination addresses.
Explains how to view the initial status information provided by the System Manager interface.
Explains how to view log messages generated by the Firebox using the Traffic Monitor tab.
Protects network structure by hiding internal IP addresses and conserving public IP addresses.
Translates source IP addresses of outbound sessions to the Firebox's public IP, conserving addresses and adding security.
Works on a port-to-host basis, remapping incoming packets from external networks to specific internal addresses and ports.
Guides users on selecting and configuring services to control traffic flow and meet security policy goals.
Explains the five tabs in the service's Properties dialog box for configuring WebBlocker controls, schedule, privileges, and exceptions.
Guides users on activating the WebBlocker feature by double-clicking the HTTP service, accessing Properties, and checking the Activate WebBlocker box.
To Next Page
