Need help?Do you have a question about the Watchguard hifi microphone and is the answer not in the manual?
General| Type | Condenser |
|---|---|
| Polar Pattern | Cardioid |
| Sensitivity | -38dB ± 2dB (0dB=1V/Pa at 1kHz) |
| Operating Voltage | 48V Phantom Power |
| Connector | XLR |
| Power Supply | 48V Phantom Power |
Welcomes the user and introduces the purpose of the HiFi Microphone User Guide.
Explains the guide's scope and lists related system documents.
Describes the HiFi Microphone, its components (base and transmitter), and its primary functions.
Details the HiFi Microphone's technical specs and the terms of its limited warranty.
Step-by-step guide for using the HiFi Mic during an operational shift, including setup and shutdown.
Explains the base's mounting, physical connections (DVR, antenna), and charging contacts.
Details the meaning of the base's LEDs for synchronization, charging, normal, and recording states.
Covers the transmitter, its buttons (Talk/Mute, Mode, Power), external jack, and charging contacts.
Describes the transmitter's display, backlight, and various icons indicating status, battery, and mode.
Explains the meaning of the transmitter's LEDs for synchronization, charging, normal, and muted states.
Guides on how to properly sync the HiFi Mic with its base and charge its battery.
Covers charging with the vehicle ignition off and implementing multiple HiFi Microphones.
Provides best practices for optimal installation and daily usage of the HiFi Microphone.
Offers solutions for common problems like no reception, poor signal, static, or noise.
Provides steps to resolve issues where the transmitter fails to respond or synchronize with the base.
To Next Page