EasyManua.ls Logo

Watchguard V10 - End User Guide Manual

Watchguard V10
8 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
Troubleshooting Tips
version 6.0 16
Copyright Notice
Copyright© 1998 - 2002 WatchGuard Technologies, Inc. All rights reserved.
WatchGuard, Firebox, Mobile User VPN, and MUVPN either trademarks or registered
trademark[s] of WatchGuard Technologies, Inc. and/or its subsidiaries in the United States and/or
other countries.
Microsoft®, Internet Explorer®, Windows® 95, Windows® 98, Windows NT® and Windows®
2000 are either registered trademarks or trademarks of Microsoft Corporation in the United
States and/or other countries.
All other trademarks and tradenames are the property of their respective owners.
Printed in the United States of America.
Part No: 1200016
1
WatchGuard
®
Vclass
Mobile User VPN Client
End User Brochure—Windows XP
WatchGuard Vclass Mobile User VPN (MUVPN) client version 6.0
creates a secure tunnel between a remote computer and a company
network over the Internet. In other words, you can connect to the
Internet from home or on the road and then communicate safely and
security with your company network to read mail, browse Network
Neighborhood, or access shared files.
What do I need?
Every computer used as a MUVPN client remote computer must have
the following requirements.
System Requirements
PC-compatible computer with minimum 233 MHz Pentium
processor or equivalent
Minimum RAM for Microsoft Windows XP: 64 MB
Minimum 1.5 GB hard disk space
Native Microsoft TCP/IP communications protocol
Ethernet for network connections
Microsoft Internet Explorer 5.0 or later
An Internet Service Provider account
A Dial-Up or Broadband (DSL or Cable modem) Connection

Other manuals for Watchguard V10

Related product manuals