Need help?Do you have a question about the Watchguard VISTA and is the answer not in the manual?
General| Brand | Watchguard |
|---|---|
| Model | VISTA |
| Category | Accessories |
| Language | English |
Covers basic components and operation of VISTA and VISTA WiFi, including docking, charging, provisioning, etc.
Covers pre-event capture, sleep power off, recording alerts, and covert mode.
Details new features for version 2, including optional Wi-Fi, GPS, group recordings, and SmartConnect app.
Explains docking VISTA in USB, Transfer Station, and WiFi Base.
Details how to attach and wear the VISTA camera securely.
Instructions on how to turn the VISTA camera on and off.
Explains how to start and stop recording events.
Guides on how to assign categories to recorded events.
Introduces the VISTA Wearable Camera as a DVR for capturing, processing, and storing video and audio evidence.
Lists the steps for a basic workflow when using VISTA.
Details how to dock VISTA in a USB Base and its capabilities.
Details how to dock VISTA in a Transfer Station and its capabilities.
Explains docking VISTA WiFi in a WiFi Base and its functions.
Guides on how to provision VISTA using Evidence Library software.
Explains how VISTA configuration is set up in Evidence Library software.
Details how to upload recorded events from VISTA using different bases.
Explains how to generate and use RATF events.
Describes how to clear storage after uploading events.
Guides on how to update VISTA's firmware using Evidence Library software.
Explains how to charge the VISTA camera's battery using different bases.
Details how VISTA WiFi pairs with a WiFi Base and associates with a recording group.
Explains how to use the shirt clip and duty belt clip mounts.
Details how to attach and use the locking chest mount.
Explains how to attach the MOLLE vest loop mount.
Instructions for powering the VISTA camera on and off.
How to force VISTA to power off in rare situations.
How to start and stop recording events manually or automatically.
Instructions for manually stopping a recorded event.
How to mute VISTA's audio during a recorded event.
Step-by-step guide to categorize recorded events directly on VISTA.
Explains the types of evidence VISTA captures.
Lists and describes the physical components of the VISTA camera.
Lists and describes the different mounting options for VISTA.
Explains the purpose of USB, Transfer Station, and WiFi bases.
Provides a general overview of the VISTA Wearable Camera's capabilities.
Details the types of evidence collected by VISTA.
Describes VISTA's video recording capabilities and quality.
Details sensor, lens, microphone, buttons, display, and feedback indicators.
Covers battery, storage, Wi-Fi, GPS, and mounting.
Describes tones, vibration, and LEDs for status feedback.
Details VISTA's storage capacity, usage, and low storage alerts.
Explains the VISTA's LiPo battery, charging, and available capacity versions.
Explains the LOW BATT and LOW BASE messages and their causes.
Details the built-in Wi-Fi feature of VISTA WiFi.
Explains the GPS feature for VISTA WiFi and its benefits.
How to check the GPS signal status on VISTA WiFi.
Describes the rotatable shirt clip mount.
Details the locking chest mount and its magnetic properties.
Describes the duty belt clip mount.
Explains how to attach the MOLLE vest loop mount.
Lists additional mounting options like Velcro and Klick Fast.
Explains the VISTA's interaction with the USB Base for charging and software interaction.
Step-by-step guide to set up the USB Base.
Details the VISTA Transfer Station's capabilities for charging and interaction.
Instructions for setting up the Transfer Station hardware and software.
Explains the VISTA WiFi Base's role as an access point and for charging.
Information on setting up the VISTA WiFi Base system.
Allows capturing additional video before a recorded event starts.
Enables continuous video capture for RATF events.
Captures audio whenever video is being captured.
Puts the camera into a low-power state to conserve battery.
Automatically turns off the camera after a period of inactivity.
Automatically stops recording after a specified duration.
Notifies the user that recording is still active.
Disables camera tones and LEDs for discreet operation.
Highlights special features for recording, battery, and storage saving.
Details features like Pre-Event Capture, RATF, and Force Microphone.
Details features for power and storage conservation.
Explains how to enable and use Covert Mode.
Details how Pre-Event Capture works with recorded events.
How to enable and use the RATF feature for continuous video capture.
How to request an RATF event from VISTA.
How RATF affects storage and the need to upload events.
Explains audio capture with RATF and Force Microphone On.
How to enable Force Microphone On for continuous audio capture.
How VISTA enters a low-power state to conserve battery.
Alerts before entering sleep state and how to cancel it.
How VISTA exits the sleep state.
How VISTA automatically powers off after inactivity.
How to automatically stop recorded events at a set duration.
Warnings before the maximum event time is reached.
Notifies the user that recording is still active.
How to place VISTA into and exit Covert Mode.
Explains distributed multi-peer recording.
Lists members and their functions in a recording group.
How devices collaborate for group recordings.
How VISTA WiFi behaves within a recording group.
Explains how VISTA WiFi and VISTA WiFi Base collaborate in a recording group.
Defines a recording group and its members.
Lists the components of a recording group.
Functions of the Smart Power Switch in a recording group.
Role of the 4RE DVR in group recordings and event categorization.
How the VISTA WiFi Base pairs, acts as hotspot, and notifies the group.
How VISTA WiFi pairs with the base and associates with the group.
Describes radios and MDC/laptops in the system.
How devices collaborate to create group recordings.
Explains VISTA WiFi's actions during group recordings.
Steps to connect VISTA WiFi to the SmartConnect app.
How to review recorded event video using SmartConnect.
How to categorize events via the SmartConnect app.
How to live stream the VISTA camera view using SmartConnect.
How to start/stop events using the SmartConnect app.
Accessing and adjusting SmartConnect settings.
Introduces the VISTA SmartConnect app and its capabilities.
Steps to activate the VISTA WiFi hotspot for SmartConnect.
Detailed steps for initial connection.
Simpler steps for subsequent connections.
How to review recorded events on the smartphone app.
How to capture and save snapshots from the live view.
Steps to categorize recorded events via the app.
How to initiate live streaming from VISTA WiFi.
Accessing Covert Mode and capturing snapshots from the live view.
How to start and stop recordings via the app.
Accessing camera settings and data through the app.
Options available in the Camera Settings screen.
Information displayed in the Camera Data screen.
Steps to set up the physical Transfer Station hardware.
How to configure the Transfer Station for software integration.
Explains the VISTA Transfer Station's role in uploading evidence.
Components included with the Transfer Station.
Steps for labeling the Transfer Station slots.
How to connect power and Ethernet cables.
How to configure the Transfer Station via its web page.
Setting Location, Station ID, and IP configuration.
Details on assigning static IP addresses.
Setting the Upload Server IP address and Port, and DHCP.
Details on configuring static IP addresses for slots.
Tasks like upgrading, changing credentials, disabling.
Steps for upgrading software and firmware.
How to change the default username and password.
How to disable the web server for security.
Performing a soft restart of the Transfer Station.
Steps to access and configure the Transfer Station web page.
To Next Page
