29 30
SETTING THE TIME
1� Pull the crown out to the 1st position�
2� Turn the crown to set hour and minute hands�
3� After the time has been set, push the crown back to the Normal position�
WINDING THE MAINSPRING
Automatic winding watch can also be wound by turning the crown in the Normal position�
Wind a few times clockwise until seconds hand starts to move naturally�
Hour hand
Front view
skeleton
Minute hand
Normal crown
position
Crown 1st
position
Seconds hand
Ligne 11-1/2’’’
Diameter ø26�00mm
Total Thickness 5�67mm
Hands 3 (H/M/S)
Jewels 21
Vibration Frequency 21,600 per hour
Accuracy -20~+40 seconds/day
Running Time More than 40 hours
Winding Automatic & manual
Additional Mechanisms Shock-absorber for balance staff
82S0 caliber Instructions and Specications 82S0 caliber Instructions and Specications
To Next Page
Loading...