Do you have a question about the Water Factory Systems SQC4 Series and is the answer not in the manual?
Brand | Water Factory Systems |
---|---|
Series | SQC4 |
System Type | Reverse Osmosis |
Filtration Stages | 4 |
Membrane Type | Thin Film Composite (TFC) |
Storage Tank Capacity | 4 Gallons |
Operating Pressure | 40-100 psi |
Weight | 20 lbs |
Warranty | 1 year limited warranty |
Production Rate | 50 GPD |
Included Filters | Sediment, Carbon Block, RO Membrane, Post Carbon |
Filter Lifespan | 6-12 months |
Choosing where to place the appliance based on space, customer preference, and potential issues.
Clearing the workspace, arranging light, and inspecting supply lines before installation.
Unpacking, checking parts, verifying tank pressure, and installing the RO membrane cartridge.
Drilling the correct hole size in the sink or countertop for the RO faucet installation.
Installing the RO faucet, including air gap connections, onto the sink or countertop.
Connecting the faucet adapter to the cold water stem and attaching the orange feedwater tubing.
Prefilling and sanitizing the storage tank with special granules to ensure water quality.
Attaching the drain saddle to the drain pipe and routing the reject line.
Mounting the filtration assembly and positioning the storage tank within the cabinet.
Connecting all components with tubing, ensuring proper routing and bends for optimal flow.
Connecting the RO system to a refrigerator icemaker or water dispenser.
Checking connections, opening water supply, and verifying for leaks before initial operation.
Flushing the system for 24 hours to remove preservatives and checking performance.
Cleaning the work area and completing warranty paperwork.
Recommends periodic water testing and routine maintenance for effective contaminant reduction.
Guidelines for replacing sediment, carbon, and postfilter cartridges based on service life.
Information on replacing the RO membrane cartridge, dependent on water conditions and maintenance.
Routinely sanitizing both the storage tank and filtration assembly for water quality.
Procedure for leaving the RO appliance unused for extended periods.