Need help?Do you have a question about the Water Furnace Versatec Compact and is the answer not in the manual?
AHRI performance data for PSC motor models.
AHRI performance data for ECM motor models.
Explains cooling efficiency units and test condition changes.
Details formulas for pump and blower power correction.
Provides equations for ISO capacity and efficiency.
Compares ARI and ISO test conditions for various parameters.
Key features and benefits of the Versatec Compact Series.
Details features of the vertical cabinet design.
Details features of the horizontal cabinet design.
Covers flexible product options, IAQ, and sound packages.
Details the optional factory-mounted electrical disconnect.
Discusses low ceiling height installation for specific models.
Explains UPC for BAS integration and advanced control capabilities.
Covers control features, modes, and safety functions.
Explains status and fault indicators via LEDs.
Covers refrigerant type, cabinet construction, and filter rack options.
Details electrical box features and compressor types used.
Covers insulation features and service access points.
Details the TXV for refrigerant metering.
Explains coaxial and all-aluminum air coil design and benefits.
Details blower motor types and housing design for quiet operation.
Explains the benefits and operation of 5-speed ECM motors.
Details the UPC controller and ZS Series sensors.
Lists key features of the UPC controller.
Describes optional features like BACview and sensor kits.
Explains the touch-screen interface for configuration.
Describes the smart tablet option for remote access.
Details various sensors used with the UPC system.
Lists fault codes for the Aurora Base Control.
Explains status indicators for the UPC controller.
Details accessory relay functions and electric heat outputs.
Lists advanced control options and relays.
Covers analog output and variable speed pump control.
Details the energy monitoring kit for power usage.
Describes the refrigerant monitoring kit for system diagnostics.
Explains the performance monitoring kit for heat extraction/rejection.
Compares features of different ZS sensor models.
Details sensing elements, ranges, and accuracy.
Covers power requirements and communication interfaces.
Explains the basic principle of water source heat pumps.
Discusses system choices for Versatec Compact Series.
Describes systems using plate heat exchangers.
Details surface water system applications.
Explains systems using cooler/boiler configurations.
Specifies requirements for water treatment and potential damages.
Discusses using secondary heat exchangers for contaminated water.
Guidance on unit location and space requirements.
Details water piping requirements and connections.
Instructions for horizontal unit installation and hanging.
Covers secondary drain pan use and attic installation precautions.
Discusses noise reduction and sound performance.
Provides guidance on ductwork for noise reduction.
Provides dimensional drawings and labels for vertical units.
Detailed table of vertical unit dimensions and knockouts.
Shows disconnect locations for vertical units.
Provides dimensional drawings for horizontal units.
Detailed table of horizontal unit dimensions.
Shows disconnect locations for horizontal units.
Provides dimensions for hanger kits.
Shows weight distribution for vertical and horizontal units.
Details compressor types and blower motor specs.
Covers water connection sizes and volumes.
Details air coil dimensions and filter standards.
Table showing voltage/phase availability for PSC motors.
Table showing voltage/phase availability for Variable Speed ECM.
Table showing voltage/phase availability for 5 Speed ECM.
Detailed electrical data for PSC motors by model.
Detailed electrical data for 5-Speed ECM motors.
Detailed electrical data for Variable Speed ECM motors.
Table showing PSC motor airflow at various static pressures.
Table showing 5-Speed ECM motor airflow by speed setting.
Table showing Variable Speed ECM motor airflow by dip switch settings.
Procedure for setting speeds without AID Tool.
Procedure for setting speeds using AID Tool.
Steps for selecting units in boiler/tower applications.
Steps for selecting units in geothermal applications.
Walkthrough of a cooling selection example.
Explains how to correct performance for antifreeze use.
Formulas for heating calculations.
Formulas for cooling calculations.
Glossary of terms used in the manual.
Explains notes related to performance tables.
Specifies minimum and maximum operating limits.
Table for correcting cooling capacity based on conditions.
Table for correcting heating capacity based on conditions.
Table for correcting performance based on airflow.
Data on pressure drop across units at various GPM and temperatures.
Heating performance data for UB006 PSC model.
Cooling performance data for UB006 PSC model.
Heating performance data for UB009 PSC model.
Cooling performance data for UB009 PSC model.
Heating performance data for UB012 PSC model.
Cooling performance data for UB012 PSC model.
Heating performance data for UB015 PSC model.
Cooling performance data for UB015 PSC model.
Heating performance data for UB018 PSC model.
Cooling performance data for UB018 PSC model.
Heating performance data for UB024 PSC model.
Cooling performance data for UB024 PSC model.
Heating performance data for UB030 PSC model.
Cooling performance data for UB030 PSC model.
Heating performance data for UB036 PSC model.
Cooling performance data for UB036 PSC model.
Heating performance data for UB041 PSC model.
Cooling performance data for UB041 PSC model.
Heating performance data for UB042 PSC model.
Cooling performance data for UB042 PSC model.
Heating performance data for UB048 PSC model.
Cooling performance data for UB048 PSC model.
Heating performance data for UB060 PSC model.
Cooling performance data for UB060 PSC model.
Heating performance data for UB070 PSC model.
Cooling performance data for UB070 PSC model.
Heating performance data for UB006 ECM model.
Cooling performance data for UB006 ECM model.
Heating performance data for UB009 ECM model.
Cooling performance data for UB009 ECM model.
Heating performance data for UB012 ECM model.
Cooling performance data for UB012 ECM model.
Heating performance data for UB015 ECM model.
Cooling performance data for UB015 ECM model.
Heating performance data for UB018 ECM model.
Cooling performance data for UB018 ECM model.
Heating performance data for UB024 ECM model.
Cooling performance data for UB024 ECM model.
Heating performance data for UB030 ECM model.
Cooling performance data for UB030 ECM model.
Heating performance data for UB036 ECM model.
Cooling performance data for UB036 ECM model.
Heating performance data for UB041 ECM model.
Cooling performance data for UB041 ECM model.
Heating performance data for UB042 ECM model.
Cooling performance data for UB042 ECM model.
Heating performance data for UB048 ECM model.
Cooling performance data for UB048 ECM model.
Heating performance data for UB060 ECM model.
Cooling performance data for UB060 ECM model.
Heating performance data for UB070 ECM model.
Cooling performance data for UB070 ECM model.
Wiring diagram for Aurora Base Control with PSC motor.
Explains LED flash codes for status and timing events.
Wiring diagram for Aurora Base Control with 5-Speed ECM.
Wiring diagram for Aurora Base Control with Variable Speed ECM.
Wiring diagram for commercial Aurora with VFD ECM.
Wiring diagram for Aurora control with UPC and sensor info.
Specifies general requirements for installation and certification.
Details cabinet materials, insulation, and heat exchanger specs.
Covers refrigerant type, circuit components, and compressor specs.
Details blower motor types and assembly details.
Details control box, transformer, and controller requirements.
Covers piping connections and horizontal unit hanger kit.
Details specifications for various field-installed hose kits.
General| Brand | Water Furnace |
|---|---|
| Model | Versatec Compact |
| Category | Heat Pump |
| Language | English |
To Next Page
