Water I.D. 6011 User Manual

User‘s Guide
pH
Waterproof Tester
Model: 6011 / 6012
Calibration Certificate
This certificate guarantees that the
product has been inspected and
tested in accordance with the
published specifications.
The instrument has been calibrated
by using equipment which already
calibrated to standards traceable to
international standards.
Serial No.:
Date:
Model:
www
.water-id.com • info@water-id.com
(Germany)
Pool-i.d.
®
Water-i.d.
®
GmbH
PrimeLab
EasyDip
FT6011
FT6012

Water I.D. 6011 Specifications

General

Type	Water Quality Meter
Measures	pH, Conductivity, TDS, Temperature
pH Range	0.00 to 14.00 pH
pH Resolution	0.01 pH
Power	4 x 1.5V AAA batteries
TDS Range	0 to 1999 ppm
Conductivity Resolution	1 µS/cm
TDS Resolution	1 ppm
Temperature Resolution	0.1 °C
Conductivity Range	0 to 1999 µS/cm

Summary

Introduction

Features

Applications

Specifications

Maintenance

Battery Replacement

Procedure for replacing the battery in the pH tester, including compartment access and polarity.

Electrode Replacement

Steps to remove and install a new pH electrode module, ensuring proper sealing.

Device Description

Measurement

Measurement Notes

Important considerations for accurate pH measurement, including calibration frequency and sample handling.

Accessories

Preparation

Calibration