Waterco ECO-V 150 - User Manual

ECO-V 150 Pool Pump
Owners Manual Installations
Product Image to be supplied Joey.
This equipment must be installed and serviced by a qualified technician.
Improper installation can create electrical hazards which could result in property
damage, serious injury or death. Improper installation will void the warranty.
Notice to Installer
This manual contains important information about the installation, operation and safe
use of this product. Once the product has been installed this manual must be given
to the owner/ operator of this equipment.

Summary

Installation and Safety Notices

Installation Warning

Warning about qualified technician installation and voiding warranty if improperly installed.

Pump Installation Precautions

Electrical Safety and Connection

Electrical Installation Requirements

Emphasizes licensed electrician, circuit breakers, grounding, bonding, and compliance with local codes for safe operation.

General Safety Rules

Operational Safety Guidelines

Covers safe operation, maintenance by qualified personnel, electrical hazards, and proper handling.

Quick Start and Scheduling

Factory Default Schedule

Outlines the pre-set DURATION and SPEED for STEP 1, STEP 2, STEP 3, and OVERRIDE buttons.

Custom Schedule Programming

Schedule Configuration

Setting Step Durations and Speeds

Details the process of setting DURATION and SPEED for each STEP and OVERRIDE button.

Wiring and Connections

Mains Connection Details

Provides pin assignments, wire colors, and descriptions for mains power connection.

Wiring Diagrams

Mains Connection Diagram

Visual guide illustrating the connection of L1, L2, and EARTH to the 208-230V power source.

Keypad and Schedule Control

Keypad Button Functions Overview

Setting the Daily Schedule

Guides users on setting DURATION and SPEED for the 24-hour schedule that repeats daily.

Running the Pump

Initiating Pump Operation

Explains how to start the pump using the START key and its behavior after power outages.

Step-by-Step Operation

Advanced Operation Modes

Schedule Sequence and Restart

Override Feature Introduction

Introduces the OVERRIDE feature for temporary speed changes outside the programmed schedule.

Override Feature Details

Configuring Override Settings

Key Lockout Feature

Locking and Unlocking Keypad

System Reset and Protection

Resetting to Factory Defaults

Freeze Protection Function

Describes how the pump automatically operates to prevent freezing based on ambient temperature.

Digital Input Control

Digital Input Operation

Fault Status and Handling

Fault LED Indications

Explains the meaning of the FAULT LED, its behavior when the motor is running or stopped, and its blinking states.

Fault Clearance and Resume

Specifications and Ratings

Pump Specifications

Lists key technical specifications including voltage, current, frequency, speed range, and environmental ratings.

Installation and Maintenance Warnings

Assembly and Start-up Precautions

Provides critical warnings for connecting cables, preventing water ingress, and ensuring electrical protection devices are set.

Handling and Temperature Safety

Regular Checks and Troubleshooting

Troubleshooting Safety Warning

Alerts users to the dangers of diagnosing electrical issues and advises seeking professional help.

Troubleshooting Guide

Common Faults and Solutions

Provides a table detailing common symptoms, their causes, and potential solutions for the V-Green 165 pump.

Warranty and Electrical Advice

Waterco ECO-V 150 Specifications