Components:
② 3/8” - 3/8” Tee valve
④ Ball valve
(with sealing washer)
1/4” PE tubing
Teflon tape
⑦ Sleeve*2
⑨ Insert*2
⑧ 1/4” Compression hex nut*2
3/8” Lock clip*14
1/4” Lock clip*2
3/8” PE tubing
(Blue)
3/8” PE tubing
(White)
Tube cutter
⑤ Pressure mini
water tank
① Distribution valve
⑥ 3/8” - 3/8” - 1/4”
Tee fitting
③ 3-way quick fitting
Specifications
Water Tank Capacity: 0.26 gallon/1L
Water Tank Size: 4.1
*
4.1
*
7.3 inches/113.8
*
113.8
*
185.5 mm
Working Temperature: 41-100ºF/5-38ºC
Installation Manual Model: WD-XT
Installation instructions
Step 1
a. Connect an input water tubing(white) with a port A of the distribution valve.
b. Connect the B port of the distribution valve to the inlet port of RO system with the
white input tubing.
Step 2
Connect 3-way quick fitting, Ball valve, and
pressure mini water tank.
NOTE: Screw the ball valve onto the water tank
until tight. You don't need to screw the ball valve to
the bottom of screw thread on water tank.
To Next Page
Need help?
General
