Step 3
a. Cut the blue PE tubing at adequate length, and connect filtered water outlet of the
RO and ③ to ② And then connect port C of the distribution valve to ③ with blue PE
tubing.
b. Cut the blue PE tubing at adequate length, and connect port D of the distribution
valve and the smart faucet to ⑥.
WARNING
Pipe Cutter Hazard
Please strictly follow the instructions and be
careful not to cut your fingers or toes. Do
not allow kids to play with it. Please put it in
a place where kids can't get to them.
Step 4
Screw off the refrigerator filter, and then screw on a bypass, which is adaptive to your
refrigerator, to the filter location.
Step 5
Connect ⑥ to refrigerator with the help of ⑦, ⑧，⑨ and PE tubing of suitable length.
Step 6
Water tank flushing method: After connecting, open the three-way water inlet of the
RO machine, and then turn on switches ② and ④. Once the refrigerator and the water
tank are filled with water and the RO stops working, opening the refrigerator to take out
about 60 OZ(1L) of water. Repeat the operation at least twice will complete the flushing
of the mini water tank.
Pure water
Pure water
Inlet water
Smart Faucet
Feed water adapter
Waste water
Refrigerator
joint
Distribution valve
①
⑦
⑧
⑨
②
③
④
Refrigerator
POWER FAUCET
⑤
⑥
LOCK
OPEN
To Next Page
Loading...