What to do if none of the rings are lighting on my Waterford 75cm Hob?
If none of the rings on your Waterford Hob are lighting, it could be due to a power supply failure. Check the in-house electric system fuse and replace it if necessary. Another possible cause is that the gas supply is turned off. Make sure to check the position of the gas shut-off valve to the appliance.
Why one of the rings won’t light on my Waterford 75cm?
If one of the rings on your Waterford Hob won’t light, it could be due to a few reasons. First, check if there is any dirt on the ignitor and clean it. Another possibility is that the injector is blocked; remove any obstruction. Also, ensure that the burner cap and flame cap cover are correctly positioned.
How to fix a Waterford Hob ring that won’t stay lighting?
If the hob ring on your Waterford Hob won’t stay lit, it's likely due to dirt on the thermocouple. Try cleaning the thermocouple to resolve this issue.
Instructions for ecological disposal of electrical waste as per WEEE directive.
Diagram identifying hob control knobs and their functions.
Key specifications including electrical, dimensions, and burner performance.
Essential checks and considerations before installing the hob.
Detailed steps for cutting the worktop and mounting the hob unit.
Guidance and requirements for connecting the hob to the gas supply.
Requirements for room ventilation and proper air flow for gas combustion.
Guidance on connecting the hob to the main electrical supply.
Procedure for igniting and adjusting the gas burners.
Specific instructions for operating the dual burner component.
Guidance on selecting the most efficient burner for different pan sizes.
Instructions for cleaning the hob's stainless steel exterior surface.
Procedures for cleaning burner caps, flame caps, and ignition parts.
To Next Page
General