Waterford EMERALD E63-NG1 User Manual

FIREPLACE PRODUCTS INTERNATIONAL LTD. 6988 Venture St., Delta, BC Canada, V4G 1H4
WARNING:
If the information in these instructions are not followed exactly
,
a fire or explosion may result causing property damage
,
personal injury or loss of life.
FOR YOUR SAFETY
Do not store or use gasoline or other flammable vapors an
d
liquids in the vicinity of this or any other appliance.
Installation and service must be performed by a qualifie
d
installer, service agency or the gas supplier.
FOR YOUR SAFETY
What to do if you smell gas:
!!
!!
! Do not try to light any appliance
!!
!!
! Do not touch any electrical switch
:
do not use any phone in you
r
building.
!!
!!
! Immediately call your gas supplie
r
from a neighbour's phone. Follow
the gas supplier's instructions.
!!
!!
! If you cannot reach your ga
s
supplier, call the fire department.
908-804
MODELS: E63-NG1 Natural Gas E63-LP1 Propane
Tested by:
Installer: Please complete the details on the back cover
and leave this manual with the homeowner.
Homeowner: Please keep these instructions for future reference.
05/29/03
EMERALD Vented Gas Heater
Owners &
Installation Manual
WATERFORD
Fine Porcelain Enamel, Cast Iron Stoves from Ireland

Waterford EMERALD E63-NG1 Specifications

General

Type	Gas Heater
Model	EMERALD E63-NG1
Fuel Type	Natural Gas
Heating Capacity	63, 000 BTU
Weight	220 lbs
Ignition Type	Electronic Ignition

Summary

Safety Warnings and Installation Requirements

General Safety Precautions

Key safety warnings regarding fire, explosion, and proper handling of gas.

Professional Installation Mandate

Emphasizes that installation and service must be performed by qualified professionals.

Installation Section Overview

Installation Preparation and Safety Guidelines

Covers initial warnings, general safety rules, codes, and the installation checklist.

Venting, Gas Connection, and Pressure Testing

Details venting requirements, gas connection, and pressure testing procedures.

Appliance Adjustments, Conversions, and Log Installation

Maintenance Section Overview

Routine Maintenance and Cleaning Procedures

Installation Preparation and Safety

Pre-Installation Warnings and Guidelines

Covers pre-installation checks, safety warnings, and general safety information.

Comprehensive Installation Checklist

A step-by-step list of essential tasks for a correct installation.

Installation: Clearances and Fan

Clearances to Combustible Materials

Detailed minimum clearances required from the appliance to surrounding materials.

Installation: Venting and Altitude Considerations

Draft Hood Functionality and High Altitude

Venting System Requirements and Installation

Specifications for venting systems and procedures for flue installation.

Installation: Gas Connection and Aeration

Gas Supply Connection and Pressure Testing

Detailed instructions for making gas connections and performing pressure tests.

Installation: Gas Valve and Conversion Kit

Natural Gas to Propane Conversion Kit Details

Details the conversion kit and its components for changing fuel type.

Installation: Fuel Conversion and BTU Adjustment

Propane Conversion Procedure Steps

Step-by-step guide for converting the appliance to propane, including checks.

Installation: Testing and Optional Controls

Flue Spillage Testing Procedure

Installation: Final Checks and Wiring

Final Appliance Check and Verification

Operating Instructions: Lighting and Controls

Pilot and Burner Lighting Procedures

Step-by-step guides for safely lighting the pilot and main burner.

Operating Instructions: Reference Information

Copy of Lighting Plate Safety Instructions

Reproduced safety and lighting instructions typically found on the appliance's label.

Maintenance: General and Component Service

General Maintenance and Cleaning Procedures

Maintenance: Gasket, Fan, and Valve Servicing