Need help?Do you have a question about the WaterFurnace Premier2 and is the answer not in the manual?
General| Type | Geothermal Heat Pump |
|---|---|
| Heating COP | Up to 5.3 |
| Refrigerant | R-410A |
| Efficiency Rating | 5.3 COP |
| Stages | Two-Stage |
| Warranty | 10-year limited warranty |
| Operation | Heating, Cooling |
Explains energy efficiency and environmental advantages of GeoExchange systems.
Details how GeoExchange systems heat, cool, and provide hot water using earth's temperature.
Describes open loop and closed loop GeoExchange installation methods.
Outlines WaterFurnace's commitment to quality and details warranty coverage for owners.
Explains thermostat display, buttons, and basic functions for accurate room control.
Guides on setting HEAT, COOL, AUTO, E HEAT, and OFF modes for optimal comfort.
Details how to select and manage continuous fan operation for air circulation.
Explains thermostat displays like TROUBLE, CLEAN FILTER, and power failure behavior.
Provides steps for when the unit stops working and general troubleshooting advice.
Introduces status lights on the unit for identifying operational status and problems.
Details specific status lights (Drain, Water Flow, Pressure, Airflow) and associated service tips.
Outlines the procedure to reset the unit after a shutdown or fault.
Describes built-in safety controls like DHW Limit and DHW Pump Switch.
Covers essential maintenance tasks like checking and cleaning/replacing air filters.
Provides guidance on water supply systems and maintaining the condensate drain pan.
Recommends annual inspections by a qualified dealer for optimal performance.
To Next Page
