Need help?Do you have a question about the WaterFurnace TP32U03 and is the answer not in the manual?
General| Brand | WaterFurnace |
|---|---|
| Model | TP32U03 |
| Category | Thermostat |
| Language | English |
Temporarily override programmed temperature settings by adjusting the desired heat or cool point.
Configure the thermostat's internal clock, including daylight saving options.
Set a continuous temperature hold for specific periods or indefinitely.
Select how the thermostat controls the fan: AUTO, ON, or INTERMITTENT.
Switch between system modes like HEAT, COOL, AUTO, or EMERGENCY HEAT.
Choose between Fahrenheit (°F) and Celsius (°C) for temperature display.
Set the thermostat's clock to display in either 12-hour or 24-hour format.
Customize the display contrast for better readability.
Adjust the duration the display backlight remains active after button presses.
Utilize pre-defined temperature schedules for quick setup.
Set customized temperature and fan events for each day or group of days.
Efficiently replicate a day's program to other days.
Restrict access to settings, allowing only temperature adjustments or full keypad lockout.
Calibrate thermostat readings to compensate for sensor inaccuracies.
Enable automatic switching between heating and cooling based on setpoints.
Configure the fan to cycle on and off periodically for air circulation.
View system status, faults, and input/output information for troubleshooting.
Key safety warnings and precautions before installing the thermostat.
Instructions on choosing location, mounting, and wiring the thermostat.
Schematics for connecting the thermostat to various HVAC system components.
Configure system type, stages, and IntelliZone settings.
Settings related to optional accessories like humidifiers or air cleaners.
Configure alerts for air filter, humidifier, or UV lamp replacement.
Store contractor contact details for service reference.
Control fan operation when auxiliary heat is active.
Manage humidification or dehumidification based on room humidity levels.
Set reversing valve operation and reset thermostat to factory defaults.
Fine-tune thermostat sensitivity, cycle rate, and temperature differentials.
Limit the number of equipment cycles per hour for efficiency and longevity.
Configure smart recovery for efficient temperature transitions and set daily events.
Control the staging of auxiliary heat based on time and temperature demand.
Prevent system operation if outdoor temperature is outside desired range.
Manage compressor staging behavior, especially for multi-stage systems.
Select how the thermostat uses temperature readings from remote sensors.
To Next Page
