WaterGeneral RO 585 - PRODUCT SPECIFICATION; System Requirements; Filter Service Life; Purification Processes; Filter specifications

2
PRODUCT SPECIFICATION
5- Stage Reverse Osmosis Water Purification Systems
Model no: RO585
Capacity: Generates 45 to 85 gallons per day depends on water temperature, pressure, chemistry variations)
System includes
• RO unit: 5-stage unit, all filters included.
• Storage Tank: Pressurized tank with pre-charge pressure of 7~10 psi., powder coated steel construction with Food
Grade butyl water bladder. NSF listed
• Water Dispensing Faucet: lead-free, long reach goose neck type, chrome steel, locking lever for continuous dispensing.
• Hardware: feed water adapter, feed water valve, drain saddle valve, tank valve, and screws.
• Installation & Service manual
System Requirements
• Working pressure: 40 to 80 psi feed water pressure required, if below 40 psi, a booster pump is needed. We have a RO
system with booster pump assembly. If the input pressure is above 80 psi, you MUST put a pressure regulator to reduce
the pressure below 80 psi.
• Working temperature: 100 ~ 40 deg. F ( 37 ~ 4 deg. C )
• pH range: 2-11
• If feed water has hardness level above 300 ppm, we recommend putting a water softener prior to the RO system.
• If feed water has iron, rust problem, we recommend putting a iron filter prior to the RO system.
• If feed water has bacteria problem, we recommend putting an ultra violet sterilizing system prior to RO system.
Filter Service Life
• 1
st
Stage Sediment filter: Recommend changing every 6 ~12 months. Replacement filter Part no. 201
• 2
nd
Stage Carbon block filter: Recommend changing every 6 ~12 months. Replacement filter Part no. 205
• 3
rd
Stage Carbon block filter: Recommend changing every 6 ~12 months. Replacement filter Part no. 205
• 4
th
Stage TFC/TFM membrane: Recommend changing every 2~3 years. Replacement filter Part no. 385
• 5
th
Stage Inline carbon filter: Recommend changing every 6 ~12 months. Replacement filter Part no. 213
The filters & membrane used are all standard sizes.
Dimension
• RO unit: Length 15 inch, Width 5 ½ inch, Height 16 inch
• Storage tank: Diameter 10 ¾ inch, Height 15 ¼ inch
• Faucet: 9 ½ inch above counter top
Warranty
• 1 years Limited Warranty on parts, components. Filters are not under warranty.
Performance
• Average Rejection rate: 92 to 98% of dissolved solids after RO
Purification Processes/ Filter specifications
Removes microbiological contaminants like Cysts (protozoan), inorganic/Radiological contaminants like Barium,
Cadmium, Copper, Chromium (hexvavalent), Chromim (trivalent), Fluoride, Lead, Radium 226/228, Selenium, etc.
Ammonia, Arsenic, chloramines, chlorine, copper, lead, nitrate, phosphate, silica, hardness, calcium, magnesium, other
dissolved solids.
• 1
st
stage: 5 micron sediment filter, 2 3/4”. x 9 7/8” height, made by 100% pure polypropylene fibers
• 2
nd
& 3
rd
stage: carbon filter, 2 3/4” x 9 ¾” height, composed of high-performance coconut shell carbon.
• 4
th
stage: TFC/TFM type membrane, 75 GPD, 1 ¾” x 11 ¾” long
• 5
th
stage: Inline carbon filter (polishing filter, improves taste): 2” x 10”