Waterite FUSION2 F Series User Manual

Advanced Water Conditioners
featuring the Custom Control F2CC Valve
OWNER’S MANUAL
FOR ALL FUSION² F SERIES AND FCA SERIES WATER CONDITIONERS
THIS MANUAL IS TO BE LEFT WITH THE OWNER OF THE EQUIPMENT FOR
REFERENCE PURPOSES AND TECHNICAL GUIDANCE. IT IS STRONGLY
RECOMMENDED THAT QUALIFIED DEALER SERVICE PERSONNEL BE
CONTACTED IN THE EVENT OF AN UNKNOWN INTERRUPTION OF SERVICE OR
APPARENT PRODUCT MALFUNCTION. AN ANNUAL PREVENTATIVE
MAINTENANCE INSPECTION BY A WATER PROFESSIONAL IS RECOMMENDED
TO ENSURE TROUBLE-FREE AND CONTINUOUS OPERATION.
www.waterite.com
Waterite Technologies, Inc. ■ 1-885 Keewatin Street, Winnipeg, MB Canada ■ R2X 2S7

Waterite FUSION2 F Series Specifications

General

Cooling System	Compressor Cooling
Hot Water Temperature	185°F (85°C)
Cold Water Temperature	45°F (7°C)
Voltage	60Hz
Material	Food Grade Plastic
Color	White

Summary

Control Valve Specifications

General Instructions

Cycle Sequence

Softener System Setup

Set Time of Day

Bypass Valve

Installation

Site Requirements

Essential site conditions for proper water conditioner installation.

Installer Settings

Set Time of Day

Procedure to set the current time for system operation and regeneration.

Normal Operating Displays

Regeneration Mode

Explanation of the system's regeneration cycle operation and display.

Manual Regeneration

How to manually initiate a regeneration cycle for the water conditioner.

Power Loss & Error Display

Error Message

Guidance on interpreting and responding to error codes displayed by the unit.

Low Salt Warning

Resetting the Salt Amount After Adding

Steps to update salt level after refilling the brine tank.

Start Up Instructions

Replacement Parts

Front Cover and Drive Assembly

List of parts for the front cover and drive mechanism.

Piston Assembly

List of parts for the water conditioner's piston mechanism.

Injector assembly with Cap, Plug, Screen and O-Ring

Replacement parts for the injector assembly.

Refill Port Assembly

Replacement parts for the brine tank refill port.

Drain Line Assembly, 3/4"

Replacement parts for the 3/4 inch drain line.

Drain Line Assembly, 1"

Replacement parts for the 1 inch drain line.

Water Meter and Meter Plug

Replacement parts for the water meter and its plug.

Bypass Valve

Replacement parts for the bypass valve assembly.

Installation Fitting Assemblies

Common Parts For all Fittings

Common components used across various installation fittings.

Service Wrench

Drive Assembly

Drive Cap Assembly, Main Piston and Regenerant Piston

Spacer Stack Assembly

Injector Cap, Screen, Injector Plug and Injector

Refill Flow Control Assembly or Refill Port Plug

Water Meter or Meter Plug

Bypass Valve

Troubleshooting Procedures 1

Troubleshooting Procedures 2