EasyManua.ls Logo

WaterLogic PUREZZA CLASSE - User Manual

WaterLogic PUREZZA CLASSE
12 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
PUREZZA CLASSE
BASE CABINET
Question and Answer IconNeed help?

Do you have a question about the WaterLogic PUREZZA CLASSE and is the answer not in the manual?

Summary

INTRODUCTION

PRECAUTIONS AND GENERAL RECOMMENDATIONS

SAFETY PRECAUTIONS

General safety guidelines for installation and operation of the water purification system.

Potable Water Supply Requirements

System is for potable water only; not for microbiologically unsafe or unknown quality water.

Indoor Use and Environmental Conditions

Unit must be used indoors, avoiding direct sunlight, heat, freezing, and high humidity.

Grounding Instructions

Proper grounding is required to reduce the risk of electric shock.

Water Pressure Regulation

Input pressure must be regulated to 3 bar to prevent injury or damage.

UV-C Emitter Safety

Warns about UV-C radiation harm to eyes/skin and handling precautions.

Damaged Unit Operation Warning

Damaged units or cords must be replaced by qualified personnel to avoid hazards.

Electrical Installation Requirements

Instructions for installing the appliance's power cord under a counter or in a cabinet.

Electrical Shock Hazard Warning

Emphasizes using dedicated, earthed outlets and avoiding extension cords.

EN User Safety Instructions

Safety for children and persons with reduced capabilities (EN).

IEC User Safety Instructions

Safety for persons with reduced capabilities (IEC).

PRODUCT INFORMATION

Contents and Parts List

Illustrates and lists all components included with the base cabinet.

Technical Specifications

Details physical dimensions (W x D x H) and net weight of the base cabinet.

INSTALL AND ASSEMBLY

Assembly Procedure Overview

General instructions and safety notes for assembling the base cabinet.

Step 2: Attach Left-Hand Panel

Attaching the left-hand panel to the down panel using rubber feet or casters.

Step 3: Install Shelving

Securing the middle and top shelves to the left-hand panel.

Step 4: Attach Right-Hand Panel

Fixing the right-hand side panel to the base cabinet structure.

Step 5: Attach Rear Panel

Securing the rear panel to the back of the base cabinet.

Step 6: Fit Front Panel and Door Hinges

Attaching the front panel and ensuring the door operates correctly.

Step 7: Final Cleaning

Cleaning the base cabinet panels with a sanitizing spray for hygiene.

WaterLogic PUREZZA CLASSE Specifications

General IconGeneral
BrandWaterLogic
ModelPUREZZA CLASSE
CategoryDispenser
LanguageEnglish

Related product manuals