Waterous CM Series User Manual

Overhaul Instructions
CM/CMU Series Fire Pumps
Form No.
F-1031
Section
4212
Issue Date
06/30/95
Rev. Date
5/11/18
Table of Contents
Type of Overhaul
Pump Drive
See
Table
Page
Complete Disassembly of Pump
Transmission Mounted Directly to the Rear
of the Pump
1
3
Transmission Mounted Directly to the Front
of the Pump
2
4
Direct Drive (The pump is driven by a
remotely mounted transmission or P.T.O.,
the pump is turned by an end yoke on the
impeller shaft.)
3
5
Replacement of Packing or Mechanical
Seals Without Disassembling the Pump
Direct Drive or Transmission Mounted
Directly to the Pump
4
6
Removal and Installation of Transfer
Valve
Direct Drive or Transmission Mounted
Directly to the Pump
5
7
Visit us at www.waterousco.com
Waterous Company 125 Hardman Avenue South, South St. Paul, Minnesota 55075 USA (651) 450-5000
Instructions subject to change without notice.

Waterous CM Series Specifications

General

Series	CM Series
Pressure	Varies by model
Horsepower	Varies with model
Material	Stainless Steel
Application	Firefighting
Pump Type	Centrifugal
Rated Capacity	Varies by model