Waterpik WP-450 - Quick Start Guide Manual

QUICK START GUIDE
1
3 4
OFF
Plug
in
Insert
2
I
I
II
O
Remove
Plug
Turn power
switch OFF (O),
plug power cord
into outlet, and
insert the charging
cord into the unit.
Lift the flip top on
reservoir and fill
with lukewarm
water. Refill as
needed.
Unplug
charging
cord from
unit prior to
filling with
water and
during use.
Select the appropriate
tip and insert into the unit.
Press firmly until the tip
clicks into place.
Caution: Do not
press tip eject button
while unit is running.
continued on back
To increase water
pressure move to
HI (II) setting.
For first time use,
adjust the pressure
setting to the
LOW (I) setting
Model WP-450
I
I
II
O
LOW
Pressure
Setting
Charge Unit for 24 Hours
Prior to First Use.
Insert Tip:
Fill the Reservoir:
Adjust Water Pressure: