Waterpik WP-563 Quick Start Guide

MODE
HIGH
LOW
MEDIUM
Magnetic
Attachment
MODE
HIGH
LOW
MEDIUM
MODE
HIGH
LOW
MEDIUM
Insert
QUICK START GUIDE
Review full instruction book prior to use
Charge unit for 4 hours
by placing the magnetic
charger on the front of
the unit.
Insert tip firmly until
it clicks into place.
Fill reservoir with
warm water.
Press mode button to
adjust pressure. Start with
the lowest setting and
increase to your liking.
Close lips enough to prevent splashing,
while still allowing water to flow from
mouth into the sink.
Aim water just above the gumline at a 90 degree
angle. Follow the gumline and pause briefly
between teeth.
TO AVOID MESS:
PLACE THE TIP
IN YOUR MOUTH
BEFORE TURNING
UNIT ON
1
3 4
2
FIRST USE
TECHNIQUELEAN OVER SINK
START WATER FLOSSING
© 2017 Water Pik, Inc.
1.800.525.2774 (USA) 1.888.226.3042 (Canada)
Model WP-560/562/563/564/565/566
This device is compatible with voltages of 100-240VAC, 50/60 Hz
English

Waterpik WP-563 Specifications

General

Brand	Waterpik
Model	WP-563
Category	Accessories
Language	English