Waterpik WP-810 Quick Start Guide

Insert
6
Water ON
QUICK START GUIDE
Review full instruction book prior to first use.
1
©2017 Water Pik, Inc.Model WP-810/811/812
This device is only compatible with voltages of 100-240 VAC, 50/60 Hz
Fill reservoir with
warm water and
replace it firmly
on the base.
Insert tip firmly
until it clicks into
place.
Turn pressure to high, point
tip into sink, turn power
and water switches on until
water flows. Then turn off.
FIRST USE

Waterpik WP-810 Specifications

General

Brand	Waterpik
Model	WP-810
Category	Accessories
Language	English