Waterpik WP-861 - Quick Start Guide Manual

Insert
8
6
Water ON
1
Fill reservoir with
warm water and
replace it firmly
on the base.
Insert tip firmly until
it clicks into place.
Turn pressure to high, point
tip into sink, turn power
and water switches on until
water flows to prime unit.
QUICK START GUIDE
Review full instruction book prior to first use
FIRST USE
©2016 Water Pik, Inc.Model WP-861
This device is only compatible with voltages of 100-240VAC, 50/60 Hz
2
4
6
8
10
ON
High