Waterra PowerPack PP1 - User Manual

CONTENTS
Part 1: POWERPACK MANUAL
CONTENTS..............................................................................................................................1
EC DECLARATION OF CONFORMITY ..................................................................................2
INTRODUCTION......................................................................................................................3
SAFETY INSTRUCTIONS .......................................................................................................4
COMPONENT IDENTIFICATION ............................................................................................9
PRE-OPERATION CHECKS..................................................................................................11
PUMPING OPERATION ........................................................................................................12
BACKPACK IN USE...............................................................................................................16
MAINTENANCE .....................................................................................................................17
TROUBLE SHOOTING ..........................................................................................................17
SPECIFICATIONS .................................................................................................................18
SERVICE ADDRESSES ........................................................................................................20
SPARES................................................................................................................................. 20
GUARANTEE ......................................................................................................................... 21
STORAGE.............................................................................................................................. 21
NOTES ................................................................................................................................... 22
w
PP1
1

Summary

SAFETY INSTRUCTIONS

Using the PowerPack PP1 on boreholes without mountable headworks

Operator responsibility

Outlines the operator's duties and responsibilities for safe operation and maintenance.

Stop the engine in the following cases

Carbon Monoxide Hazard

Warns about the dangers of carbon monoxide from exhaust and advises on ventilation.

Protective clothing and devices

Fire and Burn Hazard

Details precautions related to the flammability of petrol and potential burn hazards.

COMPONENT IDENTIFICATION

PRE-OPERATION CHECKS

Engine Checks

Instructs to refer to the Honda Engine Manual for engine oil and top-up checks.

Actuator Checks

Details checks for secure components, loose fixings, and clamping strap wear.

Borehole Assessment

PUMPING OPERATION

Basic Operation Steps

Outlines the initial steps for connecting the PowerPack to a borehole for pumping.

Tubing Placement and Clamping

Explains how to position the pump tubing and secure it with the clamp.

Pumping from Flush Boreholes

Describes the procedure for setting up and operating the PowerPack on flush boreholes.

Stopping the Pump

Explains the procedure for safely stopping the pump and engine.

Securing the PowerPack

Details how to attach and tighten the clamping strap to secure the PowerPack to the borehole.

Starting the Pump

Details the steps for starting the engine and adjusting the clamp arm speed.

Releasing the Clamping Strap

Vibration Warning

Warns against touching the upper frame due to high vibration exposure.

BACKPACK IN USE

MAINTENANCE

Maintenance Schedule for Pump

Maintenance Schedule for Engine

Troubleshooting Guide

SPECIFICATIONS

Pumping Performance Graphs

Vibration Level Data

Waterra PowerPack PP1 Specifications

General

Brand	Waterra
Model	PowerPack PP1
Category	Engine
Language	English