To Next PageTo Next Page
Need help?Do you have a question about the Watersnake Venom SXW 44/36 and is the answer not in the manual?
General| Type | Electric Trolling Motor |
|---|---|
| Voltage | 12V |
| Speed Settings | 5 Forward, 3 Reverse |
| Thrust | 44 lbs |
| Shaft Length | 36 inches (91 cm) |
| Blade Diameter | 9 inches (23 cm) |
Steps to follow before installing the Watersnake motor. Includes battery and cable checks.
Guidelines for connecting and using the motor with batteries, including voltage limits and wiring.
Details on recommended battery types (Deep Cycle, LiFePO4) and warnings against others.
Warning against using Ternary Lithium batteries due to high voltage output.
Table listing recommended circuit breaker sizes for different motor thrust models.
Information on charging the motor battery, including voltage limits and disconnection recommendations.
Warning against using battery boxes with built-in circuitry due to component quality.
Essential checks before operating the motor, covering mounting, battery, cables, and fuse.
Instructions on how to adjust the motor's depth using the depth collar adjustment screw.
Explanation of the digital voltage meter function and voltage readings for battery status.
Description of the tiller control for speed adjustment, including forward and reverse speeds.
Post-use procedures including disconnecting the motor, recharging, and cleaning.
Routine maintenance tasks to perform during the season, focusing on corrosion and lubrication.
Instructions for preparing the motor for storage at the end of the season, including cleaning and proper storage conditions.
Troubleshooting steps for issues related to lack of power or reduced performance, including checks for battery and connections.
Troubleshooting steps for motor noise or vibration, focusing on propeller and shear pin integrity.
Information on available propeller kits, including 2-bladed and 3-bladed options for different motor models.
