HOW IT WORKS
This Distiller produces purified water by using the oldest, most effective
method of water treatment—steam distillation. When the Distiller is
operating, the water temperature rises to 212°F (100°C), killing bacteria,
cysts, and viruses that may be present. As the boiling water (1) converts to
steam (2), it rises and leaves behind dead microbes, dissolved solids, salts,
heavy metals, and other substances. Low boiling light gases that may be
present are discharged through the gaseous vent (3). Steam is then cooled
in the stainless steel condenser (4), turning it into high quality water.
Distilled water percolates through a final polishing coconut shell carbon
filter (5) to enhance quality by adsorption of VOCs (volatile organic
compounds), and is then collected in the GE Lexan
®
polycarbonate
collector/dispenser bottle (6).
Lexan
®
is a Registered Trademark of General Electric Company
This system was tested and certified by the Water Quality Association
against WQA S-400 for the reduction of TDS (Total Dissolved Solids).
It has the product water production rate of 1 gallon per 4.5 hours and has
the product water storage capacity of 1 gallon.
Waterwise 9000
Production rate: 5.5 gallons per day
4 Waterwise 9000 Distiller Use & Care Guide
Figure A
Model Volts Hertz Watts
North America 9012 120 VAC 60 Hz 750W
Europe 9024 230 VAC 50 Hz 730W
United Kingdom 9025 230 VAC 50 Hz 730W
Southeast Asia 9026 230 VAC 50 Hz 750W
To Next Page
Loading...