EasyManua.ls Logo

Watson Commercial HS01B-1 User Manual

Default Icon
3 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Technical Specifications
Height Range
60cm 124cm
Base Width
101cm minimum 180cm maximum
Travel Speed
38mm per second
Weight Capacity
100kg
Duty Cycle
10%, Max 2 mins on, 18 mins off
4 Memory Presets
Soft Start/Stop
Adjustable Leveling Studs
Handset information
Essential Electric Height
Adjustable Desk
User Guide
Handset model HS01B-1
Question and Answer IconNeed help?

Do you have a question about the Watson Commercial HS01B-1 and is the answer not in the manual?

Watson Commercial HS01B-1 Specifications

General IconGeneral
BrandWatson Commercial
ModelHS01B-1
CategoryIndoor Furnishing
LanguageEnglish

Summary

Technical Specifications

Handset Information

Adjust Desk Upwards

Control the desk's upward movement using the handset's designated button.

Adjust Desk Downwards

Control the desk's downward movement using the handset's designated button.

Save and Recall Height Presets

Save and recall up to three preferred desk heights using the memory function.

Desk Position Alarm

Utilize the alarm function to remind of prolonged desk position.

Preset Height Instructions

Important Usage Notes

Clearance and Obstructions

Ensure the desk area is free from items that could collide with it during movement.

Pedestal Placement

Avoid placing items on mobile pedestals below the desk to prevent anti-collision activation.

Weight Limit Awareness

Adhere to the 100kg weight limit; uneven distribution may affect desk operation.

Reset Instructions

Standard Reset Procedure

Perform a standard desk reset by pressing the down arrow until the desk stops and rebounds.

Troubleshooting Reset Errors

Address 'E01', 'E02', or 'E03' errors by checking connections and retrying the reset.

Troubleshooting Desk Issues

No Signal on LED Screen

Check the power connection if the LED screen displays no signal.

LED Error Codes

Resolve 'A5r' errors by following reset instructions; check leg connections for 'E01'/'E02'.

Desktop Angle and Movement

Check for nearby object collisions for angled desktops or slow movement.

No Response to Controls

Verify all cable connections are secure if the desk does not respond to UP/Down arrows.