Need help?Do you have a question about the WATSON Haven and is the answer not in the manual?
General| Brand | WATSON |
|---|---|
| Model | Haven |
| Category | Indoor Furnishing |
| Language | English |
Lists and illustrates the main parts of the screen assembly.
Identifies all necessary hardware and tools for the assembly process.
Secure the table bracket to the worksurface using screws, leaving the square hole empty.
Insert screws into the screen at specified locations, leaving a 1/8" gap.
Connect the screen to the table bracket using additional screws.
Slide and seat the screen onto the table bracket by aligning screw heads with keyslots.
Secure the wire management clip to the table bracket using a screw.
Situate and secure the power unit in the table bracket using studs and nuts.
Mount the monitor mount to the screen and attach monitor brackets to the monitor.
Hang the monitor/bracket assembly onto the monitor mount and route cables.
Slide the lock bar through the monitor mount and brackets for security.
To Next Page
