10 HAVEN TABLE AND MEDIA SCREENS ASSEMBLY INSTRUCTIONS
(Optional) Attach Monitor Mount
Align the Monitor Mount with the holes in the Screen and secure it with (4) screws. The additional
holes can be used to raise or lower the Monitor. Attach the Monitor brackets to the back of the Monitor using the provided
Monitor mount hardware. The addtional holes in the brackets can be used to adjust the height of the Monitor. Plug in the
power cable and any additional data cables to the Monitor.
7.
BHSCS M6-1.0
x 16mm Black
(125278)
a.
b.
To Next Page
Loading...