EasyManua.ls Logo

watt box WB-OVRC-UPS-1100-1 User Manual

watt box WB-OVRC-UPS-1100-1
19 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
OWNER’S MANUAL
WB-OVRC-UPS-1100-1 WB-OVRC-UPS-1500-1 WB-OVRC-UPS-2000-1
WELCOME TO WATTBOX™
WattBox power products are designed specically to provide customers with advanced protection for their valuable electronics and custom
integrators with maximum exibility for installation. Rest assured that WattBox products deliver the protection and safety for your customers’ needs.
All WattBox products are UL certied and built with the highest-quality components available.
KEY FEATURES
Inlet Surge Protection – Built-in protection for the UPS and all connected equipment against power surges.
Automatic Voltage Regulation – Incoming power is monitored to avoid harmful over- or under-voltage conditions. Power is increased in Boost
mode and decreased in Buck mode.
Battery Backup for WattBox IP Devices– Battery backup for powering critical equipment connected to a WattBox IP device during power
outages and uctuations. Batteries can be serviced without turning the UPS off.
Emergency Power Off – Built-in contact for EPO.
PC Connection – Built-in connections for PC access to the GUI and shutdown control to notify the PC when battery level is critical.
SNMP Card (sold separately) – Use the SNMP card to access the GUI over Ethernet and notify devices on the network when the battery level is
critical.
IMPORTANT – BATTERIES ARE DISCONNECTED FOR SHIPPING
When you receive your UPS, the internal backup batteries are disconnected from the circuit board for safety during shipping. Re-connect the wires
before installing the UPS.
Step 1 Step 2 Step 3
Remove front panel. Connect the battery wires. Replace the front panel.
F
I
V
E
Y
E
A
R
L
I
M
I
T
E
D
P
R
O
D
U
C
T
W
A
R
R
A
N
T
Y
SURGE
PROTECTOR
$50,000

Questions and Answers:

watt box WB-OVRC-UPS-1100-1 Specifications

General IconGeneral
ModelWB-OVRC-UPS-1100-1
TypeLine Interactive
Output Power Capacity1100VA / 660W
Nominal Output Voltage120V
Nominal Input Voltage120V
Input Frequency50/60 Hz
Input ConnectionNEMA 5-15P
Typical Recharge Time8 hours
Interface PortUSB
Audible AlarmYes
Surge ProtectionYes
Form FactorTower
Transfer Time4-8 ms
Output Frequency50/60Hz
Battery TypeSealed Lead Acid
Battery Recharge Time8 hours
Data Line ProtectionRJ45
Control panelLED status display
Output Connections8 x NEMA 5-15R (Battery Backup)

Summary

Key Features of WattBox UPS

Inlet Surge Protection

Built-in protection for the UPS and connected equipment against power surges.

Automatic Voltage Regulation

Monitors incoming power to avoid harmful over- or under-voltage conditions.

Battery Backup for WattBox IP Devices

Powers critical equipment during outages. Batteries can be serviced without turning off the UPS.

Emergency Power Off (EPO)

Built-in contact for EPO functionality.

PC Connection

Connections for PC access to GUI and shutdown control.

Shipping Battery Disconnection and Reconnection

Battery Reconnection Steps

Steps to remove the front panel, connect battery wires, and replace the panel.

Rear Panel Connections

USB/RS-232 PC Connection

PC Connection Setup Instructions

Steps for installing software and connecting the computer to the UPS.

Basic Operation with Front Panel Buttons

Front Panel LCD Overview

LCD Menu Setup (UPS Off in Standby)

Normal Operating Modes

Battery Mode Operation

UPS switches to battery power when mains input is lost or out of range.

Fault Codes and Troubleshooting

Audible Alarms and Remedies

Troubleshooting Common Issues

Battery Replacement Procedure

Battery Access Steps

Instructions on how to access the battery compartment.

UPS Specifications

Important Safety Instructions

Temperature Rating and Pluggable Equipment Safety

Safety precautions regarding operating temperature and accessible outlets.

Internal Battery Safety

Guidelines for battery replacement by service personnel and handling precautions.

Battery Handling Precautions

Specific warnings about battery disposal, opening, and electrical hazards.

Warranty and Protection Policies

Product and Battery Limited Warranties

Covers the duration and terms of the product and battery limited warranties.

Replacement Policy and Internet Purchaser Warnings

Explains the 5-year replacement policy and warnings for internet purchasers.

Connected Equipment Protection Policy

Outlines the policy for protecting connected equipment from surges.

Warranty Claim Proof and Installation Requirements

Details proof of purchase, proper installation, and notification procedures for claims.

Claim Determination and Payment Process

WattBox's process for evaluating surge damage and determining claim eligibility and compensation.

Related product manuals