To Next PageTo Next Page
Need help?Do you have a question about the WattAge Whisper and is the answer not in the manual?
Guidance on selecting a suitable radio control system for the model.
Advice on choosing an appropriate electronic speed control for the motor.
Suggestions for the type and capacity of battery pack to use.
Guidance on selecting a suitable charger for the flight battery.
List and visual identification of components for the propeller assembly.
Identification of various wooden components included in the kit.
List and visual identification of parts for pushrod assemblies.
List and visual identification of parts for motor assembly.
Instructions for bonding dihedral braces for wing rigidity.
Step-by-step guide for fitting dihedral braces into wing panels.
Attaching a strip to secure the wing to the fuselage.
Fitting dowels into the fuselage for wing mounting.
Positioning and aligning the horizontal stabilizer on the fuselage.
Attaching the rudder to the vertical stabilizer using hinges.
Positioning and aligning the vertical stabilizer on the fuselage.
Mounting the servo tray and support into the fuselage.
Securing the servos into the installed servo tray.
Fitting and securing the nylon pushrod housings through the fuselage.
Mounting the electric motor to the aircraft's firewall.
Gluing the two halves of the plastic cowl together.
Fitting and trimming the canopy to match the fuselage and wing.
Securing the canopy to the fuselage with screws.
Attaching the plastic landing skid to the underside of the fuselage.
Positioning and securing the radio receiver in the fuselage.
Mounting the electronic speed control switch in the fuselage.
Connecting and placing the flight battery and ESC in the fuselage.
General