Need help?Do you have a question about the Watts Industries WM100SM and is the answer not in the manual?
Crucial safety and installation warnings for the control valve and plumbing.
Guidance on initial checks, proper placement, and site selection.
Instructions for installing the system's bypass valve.
Steps for moving the softener, connecting brine lines.
Procedures for connecting the drain line and initiating system start-up.
Details on setting regeneration options and factory defaults.
Table of common problems, causes, and corrections.
Addresses issues related to control valve programming and timers.
General| Type | Water Meter |
|---|---|
| Connection Size | 1 inch |
| Connection Type | Threaded |
| Max. Working Pressure | 150 psi |
| Material | Brass |
To Next Page