Need help?Do you have a question about the Watts gas sentinel GSX Series and is the answer not in the manual?
General| Brand | Watts |
|---|---|
| Model | gas sentinel GSX Series |
| Category | Security Sensors |
| Language | English |
Details specifications for the wall-mounted GSX model.
Details specifications for the flush-mounted GSW model.
Covers general installation, positioning, and safety precautions before connecting.
Step-by-step guide for installing the wall-mounted GSX detector.
Step-by-step guide for installing the flush-mounted GSW detector.
Illustrates correct and incorrect installation methods for various scenarios.
Explains the detector's warm-up phase, normal status, and LED indicators.
Describes alarm conditions, LED/buzzer alerts, and user actions during a gas leak.
Guides on connecting multiple detectors into a network and configuring master/slave roles.
Explains how to perform a test on the networked system to ensure correct operation.
Outlines basic maintenance tasks and how to perform performance checks.
Details how to record installation and replacement dates for the detector.
Describes how to enter programming mode and change detector settings.
Provides a table of common error indications, their causes, and recommended solutions.
Details the wiring for connecting 230V solenoid valves, both normally open and closed.
Details wiring for 12VCC, 12VAC, 24VCC, 24VAC solenoid valves.
Illustrates the wiring required for connecting detectors in a master-slave network configuration.
Explains the meaning of the different LED colors and states for indicating detector status.
Lists compatible faceplates for integrating the detector into different electrical systems.
To Next Page
