Watts SunTouch ConnectPlus User Manual

Installation and Operation Manual
SunTouch
®
ConnectPlus™
Smart Sensor
Description
The ConnectPlus™ Smart Sensor is a temperature and water leak-
age sensor that pairs to the ConnectPlus thermostat. This device
can be used as an optional floor temperature sensor for the radiant
floor heating system. Detected water leaks produce audible and
visual alarms, and notifications are transmitted to the thermostat.
Where to Use
Temperature Sensor
Place the Smart Sensor directly on a heated section of the floor to
use as a floor control sensor.
Water Leakage Sensor
Place the Smart Sensor directly on the floor where there is a risk
of water leakage (near water lines, washing machines, hot water
tanks, ...) within range of the ConnectPlus thermostat.
Specifications
• Power: 2 x AA batteries included
• Battery Life : 1 year
• Range: 75 ft, line-of-sight
• Pairing limit: 6 devices
• Operating Temperature range : 32°F to 104°F (0°C to 40°C)
• Operating Humidity range : 0 to 100% humidity
• Storage temperature range : -4°F to 122°F (-20°C to 50°C)
• IP Waterproof Class : IP67
• Diameter 3
3
⁄8" (85mm), Height 1
11
⁄16" (43mm)
WARNING
!
Please read carefully before proceeding with
installation. Your failure to follow any attached
instructions or operating parameters may lead to
the product’s failure.
Keep this Manual for future reference.

Watts SunTouch ConnectPlus Specifications

General

Brand	Watts
Model	SunTouch ConnectPlus
Category	Accessories
Language	English

Summary

SunTouch ConnectPlus Smart Sensor Manual

Smart Sensor Description

Details the ConnectPlus Smart Sensor as a temperature and water leak detection device.

Sensor Placement Guide

Instructions for placing the sensor as a floor temperature or water leak detector.

Temperature Sensor Placement

Place the Smart Sensor directly on a heated section of the floor for temperature control.

Water Leakage Sensor Placement

Place the Smart Sensor where water leaks are possible, within range of the thermostat.

Technical Specifications

Lists key specifications like power, battery life, range, operating temperature, and IP rating.

Important Safety Warning

Provides crucial safety instructions and a recommendation to keep the manual for future reference.

Smart Sensor Setup and Operation

Wireless Pairing Procedure

Steps to put the ConnectPlus into pairing mode and initiate sensor pairing.

Status Indicators and Functions

Explains sensor status lights (paired, error, leak) and button functions (wake, silence).

Limited 3 Year Warranty

Details the warranty period, coverage, exclusions, and liability limitations.