EasyManua.ls Logo

WaveBox WBP-TP-660 - Troubleshooting

WaveBox WBP-TP-660
19 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
17
Troubleshooting
If you have any of these problems, please try the solutions given.
• The oven does not start
o Is the door completely closed?
o Is the oven connected to a suitable single power
source?
• The food or beverages do not heat
o Is the door completely closed?
o Check the fuse in your AC or DC power system.
Do not attempt to check the fuse inside this
microwave oven. Servicing must be performed only
qualied service personnel.
o If using power outlet mode, make sure the vehicle
wiring is rated at 20 amps or greater.
• The food is either over-cooked or under-cooked
o Was the appropriate cooking time selected?
• Sparking is occurring inside the oven
o Have you put metal inside?
o Is a utensil inside?
o Is aluminum foil inside?
NOTE: For DC operation be sure to maintain correct polarity. The
WaveBox
®
will not operate with reverse polarity. To rectify, simply
connect using correct polarity: red alligator clip to positive(+)
battery post, and Black alligator clip to negative(-) battery post.
Some foreign cars and truck employ a positive ground design. The
WaveBox
®
will not operate using a positive ground connection. If
in doubt, consult with your vehicle’s dealership.
If you cannot get the unit to function correctly, contact us at:
www.thewavebox.com

Other manuals for WaveBox WBP-TP-660